0
How do you disassemble a Vermont American Right-Angle adapter from a Black and Decker drill?
Wiki User
∙ 12y ago
Open the drill chuck FULLY. Look inside the open chuck and you will see an Allen screw. This screw holds the chuck in place on the spindle of the right angle attachment. With an Allen wrench, remove the Allen screw, being careful that the threads are left-handed (reverse threads) so it will seem as though you are tightening the screw when you are actually loosening it.
With the Allen screw fully removed, take the Allen wrench and close the chuch down on the short side, as you would chuck up a drill bit. This leaves the long side of the Allen wrench protruding at a right angle to the closed chuck. It should look like a 90 degree bent drill bit closed in the chuck at this point.
Place the shaft of the right angle attachment (drill still attached at this point) in a vise, not too tight or you will damage the angle attachment, leaving the chuck free to move.
Lightly tap the long end of the Allen wrench with a hammer at it's very end in a counter-clockwise direction (normal lefty-loosey direction) of the chuck rotation and the chuck will break free and spin off the right angle attachment.
Un-screw it off the spindle in other words, using the Allen wrench as a chuck removal tool handle. the chuck will be quite tight fitting on the spindle, so you may need to get a little aggressive with the hammer to break it free.
At this point, with the chuck removed from the right angle attachment, it should be simply loosen the bolts on the angle attachment and it will slide off the drill spindle. install the chuck on the drill spindle, don't forget the reverse threads on the Allen screw when reinstalling.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Can you use a laptop DVD drive in my PC?
A 2.5 inch laptop hard drive can be used in a desktop computer with an appropriate adapter and mounting. Laptop CD / DVD drives have proprietary connectors. To use them, you would have to partially disassemble the drive, and then connect the aforementioned adapter.
Is there such thing as a European to American adapter?
I'm assuming you mean for charging or plugs. And if so, then yes.
Can an American wii console be played in UK?
yes if the tv supports "ntfs" and you have a power adapter
Will an American wii work in Germany?
An American Wii console will work if you get a power adapter. You may find, however, that games in the region will not work on it.
Can you use a 250 volt American appliance in India?
YES, Make sure to get adapter plug for India.
Do you need an adapter to charge your camera in Cuba?
Well yes and no. If you are an American not nessicarily, as they use two types of plug, your long thin plug and a two narrow round one. The standard American one was in some of the hotel rooms but not in others so it would be wise to get an international adapter.
Can you plug a American laptop into England?
Check your laptops power adapter to see if it will handle both 240v(UK) and 110v(US) if it can handle 240v (which I believe most can) then all you need is a UK plug adapter.
Are the two prongs on a UK shaver plug the same size as a European electrical socket or do I need an adapter to change it from Shaver to European?
An adapter is needed to use a North American shaver in Europe. European outlets are a different size along with a different voltage that you shaver is rated for. An Adapter will take care of both of these problems.
Does the Xbox 360 adapter?
Xbox 360 adapter? You can get a Xbox 360 wireless adapter.
What network adapter is in your Wii?
The network adapter
What would an American need to know about Dell UK?
An American would need to know that Dell UK offers the accessories necessary for use of their computer, such as an outlet adapter, while in the UK.
Do you need to use a power adapter as well as a plug adapter in Egypt from the UK?
Yes! you need to use a power adapter as well a plug adapter in Egypt from the UK.
