answersLogoWhite

0


Best Answer

A tiny 2-prong junction box on the firewall. one wire comes to it from the Ignition, & the other wire goes out from it to the starter. If you take a jumper wire from the positive on the battery & touch it to the post on the junction box where the starter wire comes out, with the key on, It should start the truck. If it doesn't, you need a new starter.

User Avatar

Wiki User

17y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you find the starter wire on an 85 GMC sierra 4x4?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Stock tire size for 1994 sierra z71 4x4?

What is the stock size tire for a 1994 sierra Z71


Change starter on polaris ATV?

How do I replace the starter on my polaris 250 4x4 Model number is EC250PF00802151. How do I change the stater on a 99 polaris explorer 4x4


What kind of vehicle is the Sierra 4x4?

The Sierra 4x4 is an SUV vehicle. It has 2 doors and 4 seats and the vehicle is manufactured by Suzuki. It has a number of features including air conditioning, fog lights and power steering.


What is the spark plug gap size for 1998 gmc sierra?

I have a 1998 GMC 1500 sierra 5.7 350 4x4 and it is 0.060


How do you remove air bag 95 GMC sierra 1500 4x4?

you remove it


Where is the starter located on a 4x4 Nissan Titan?

starter i located under the intake manifold top of the engine


How do you replace a starter for a 2003 Nissan Xterra?

How to take out and replace the starter on a 2003 4x4 Nisson Xterra


Where is the oil drain plug on a 2012 GMC Sierra 1500 4x4?

On the lower part of the oil pan. If you cannot find it then I am afraid you have no business changing your own oil.


How do you remove a starter from a 1995 jimmy?

If this is a 4X4, this can be a little tricky, you can access the wiring to starter through the wheel well, this starter is probably expensive, as it is smaller than the average bear. Good luck. HTH You first need to look under your passenger wheel well and remove the nut that connects your wire to the starter (also there is another wire with a smaller nut to disconnect from the starter). Next remove the cover plate that�s directly below the front of the starter, there should be six bolts to remove. Then remove the two bolts out of the starter, after the starter is loose. You then should be able to angle the back of the starter up towards the wheel-well. Now you should have enough room to take the smaller wire off of the back of the starter. After that�s off you�re able to remove the whole starter from your car.


How do you remove a starter from a 1995 GMC Jimmy?

If this is a 4X4, this can be a little tricky, you can access the wiring to starter through the wheel well, this starter is probably expensive, as it is smaller than the average bear. Good luck. HTH You first need to look under your passenger wheel well and remove the nut that connects your wire to the starter (also there is another wire with a smaller nut to disconnect from the starter). Next remove the cover plate that�s directly below the front of the starter, there should be six bolts to remove. Then remove the two bolts out of the starter, after the starter is loose. You then should be able to angle the back of the starter up towards the wheel-well. Now you should have enough room to take the smaller wire off of the back of the starter. After that�s off you�re able to remove the whole starter from your car.


What transmission comes in a 1999 GMC sierra 4X4 1500?

It comes with a 4L60E or 4L80E


GMC Sierra clunks when engaging 4x4?

You may have a worn or broken universal joint.