How do you fix a carbeurator when the float is sticking and overreving the motor on a yamaha blaster?

In: Motorcycle and ATV Maintenance

[Edit]

Answer

The best thing that I have found is to take the carb off completely so that you can really get at it. If the float isnt going all the way up then soemthing is probably stuck in the hole that the little o-ring and needle are in. If the o-ring is missing or detiorated it will cause this also. Take the float assembly out and the needle on the little wire. Remember how it goes back on. Get some carb cleaner spray and a really thin piece of wire. Mechanics wire is what it is called I think. Spray the carb realy good and let sit for a minute in the spray. Then run the wire through all the little holes and crevices of the carb. I also use compressed air to further blow any deposits out of it. Once you are sure it clean. Then reassemble it. That should solve that problem. It always has for me. Hope this helps.

First answer by Bradt. Last edit by Bradt. Contributor trust: 292 [recommend contributor]. Question popularity: 34 [recommend question]

Research your answer:

Can you answer other questions about motorcycles?

Answers.com > Wiki Answers > Categories > Cars and Vehicles > Motorcycles > Motorcycle and ATV Maintenance > How do you fix a carbeurator when the float is sticking and overreving the motor on a yamaha blaster?

Our contributors said this page should be displayed for the questions below. (Where do these come from

)

If any of these are not a genuine rephrasing of the question, please help out and edit these alternates.

How do you set a 94 blaster float? Will a banshee motor fit a blaster? How do you remove yamaha float bowl? How do you stop carburater float from flooding motor? How do you fix a carbeurator when the float is sticking? How do you fix a leaking carberator on a 2001 Yamaha Blaster? Your throttle is sticking on a 1982 Yamaha XJ750 Maxim What can you do? How do you fix carburator float sticking on 50 cc baja motor sports scooter? How do you fix a carbeurator when it is getting to much gas and flooding the bike and not starting?