Want this question answered?
The door latch will need replaced.
Replace the door latch.
how do you fix a window on pass side of a vw passat 2002
To fix the 300m latch, you will need to remove the inner door panel. After the door panel has been removed, then you can check the door latch components to determine what has broken and how to best repair it.
i dont know how to fix it so you tell me how to fix it
you just have to push up on the latch
If the door latch on a 1999 Chevrolet Blazer is broken on the car frame, a new latch might have to be welded in. The old door latch will have to be cut out with a torch. If the latch is broken on the door, a new door might be cheaper than welding in a new latch.
Remove door panel and replace latch mechanism
get a hinge replacement kit for that door. its the door sagging NT the latch.
lift door handle, using screwdriver, move latch forward....will open
to open, use WD40...or a crowbar You will more than likely have to remove the inside door panel to get to the latch mechanism and find the problem of the latch does not work. No crowbar!!!!
I'm not sure if they are the same or not, but I had the same problem with a 2000 Ford Ranger. The fix given on another web site for the Ranger is to spray the door latch (in the hole on the edge of the open door that mates with the latch device on the door jamb) with WD40. If the Expedition system is like the Ranger, the light switch is in door latch & WD40 will fix it for a few months, at least. Hope this works.