How do you fix a power seat belt device on a 1992 Acura Integra that will not retract when the door closes?

[Edit]

Answer

I had the same problem and have not totally solved it yet but have a workaround.

First there is are 2 30 amp fuses under the hood in the main fuse box (with the abs fuses etc). I think they label them right and left actuator or regulator. check and make sure they are good. This is the main fuse to the motor.

If this was not the problem just behind the door on the interior is a small plasic cover you can take off. You will see some blue plastic that you can pull off. You will see a rod in the center that will accept a hex head. Use a screwdriver with the correct head to turn the seat belt motor manually to the rear position. Then try to close the door. If it returns to the front then you can always turn it back and remove the fuse to keep it in the rear position.

This is kind-of a pain but will work. You just have to unbuckel the top belt by using the emergency release.

Answer

I've had the same problem on my '93 Integra. At first I thought the fuse was blown, but the problem was intermittent, so it could not have been the fuse.

- I discovered the problem to be with the integrated switch located in the door latch (on the door itself). - I used a can of silicone spray and doused the door latch with it, all while manually actuating the the latch with a screwdriver as if I were opening and closing the door repeatedly (better to use something that won't score the plastic or metal components). - Also, pull on the door handle to release the latch back to the open position. - The more silicone I sprayed into the latch crevices, the more rust came out--my passenger door isn't used very much so apparently corrosion had built up. - A few hits of Liquid Wrench to dissolve any rust might get better results. - Testing out the actuation of the automatic seatbelt on the side that does work will give you a better idea of how it all operates, i.e. at what point the switch gets triggered.

- Worst case, might have to replace the latch assembly on the door. (www.acuraautomotiveparts.org has great prices on original Acura parts).

Answer

correct me if i am wrong, but i believe seat belts have a lifetime warrantee...

Improve Answer Discuss the question "How do you fix a power seat belt device on a 1992 Acura Integra that will not retract when the door closes?" Watch Question

First answer by Turd Hurdler. Last edit by Idbrown. Contributor trust: 75 [recommend contributor]. Question popularity: 74 [recommend question]

Research your answer:

Answers.com > Wiki Answers > Categories > Cars and Vehicles > Asian Cars > Acura > Acura Integra > How do you fix a power seat belt device on a 1992 Acura Integra that will not retract when the door closes?

Our contributors said this page should be displayed for the questions below. (Where do these come from)
If any of these are not a genuine rephrasing of the question, please help out and edit these alternates.
How do you fix seat belt integra?  1992 acura integra seat belt fuse?  92 acura integra seat belt scehmatic?  1992 integra seat belt stuck on track?  1993 acura integra seat belt box location?  Where is the power seat belt relay on integra?  Where is the seat belt fuse for 91 acura integra gs?  Electric seat belt will not engage when door closes?  Where is the seat belt fuse on your 1991 acura integra?  Why dosent your seat belt retract in your 90 acura integra?  How do you fix 1992 acura integra passenger auto-seat belt?  How do you fix electronic seat belt on a 1992 acura integra?  Why dont your seat belts retract on your 1993 acura integra?  How do you repair the automatic seat belt on a 1991 Acura Integra?  How do you fix passenger side seat belt motor for 1992 acura integra?