YOU COULD USE JB WELD,ANY AUTO STORE SHOULD HAVE IT. OR YOU COULD USE A KEENSERT,THIS HAS THREADS ON THE INSIDE AND OUTSIDE.YOU WOULD HAVE TO DRILL AND TAP THE STRIPPED HOLE AND SCREW IN THE KEENSERT.THE INSIDE THREAD HAS TO BE THE SAME SIZE AS THE HOSE END, KEENSERTS ARE ALSO MADE WITH A THIN WALL, WHERE LACK OF METAL RESTRICTS THE SIZE OF THREADS.
GOOD LUCK
PAUL G
It's on the front of the block, near the exhaust manifold. A single wire attaches to it.
power steering pressure hose
1350-1450 @800rpms
There is no schrader valve, you need to source an adapter to place between where the fuel line attaches to the intake manifold.
EVO sensor. Also known as steering speed sensor.
1952 chevy truck does not have a steering damper, where and how to mount steering damper on my 1952 chevy truck .thanks jim
you have 2 hoses .a pressure line and a return line .the pressure line is steel while the return is rubber hose.
How to remove steering wheel on Chevy lumina 2000
How to remove steering wheel on a 2001 chevy tohoe
Diagram of 1990 chevy truck steering column
Could be low tire pressure or bad end links. Hope you are asking about a Chevy Trailblazer!
Will a 93 chevy silverato steering collum fit a 98 chevy silverato