This is generally caused by a worn out belt. Usually, depending on the washer, it is simple to fix if you are familiar with mechanics. You should be able to purchase the belt from a local appliance store or repair shop.
Your washing machine is still running but no more spin wash or jerking it only spins still in the middle and it does not squeeze out the water well like before what should you fix it?
You should call an repairman +97145864033 Or visit website for best washing machine repair service near me
This is a great video on how to take apart the washing machine. In reverse order, he shows you parts of a washing machine. Check out the instructions here: http://www.mindbites.com/lesson/425-fix-washing-machine
nope
If a wire comes loose or breaks, yeah, you might be able to fix it. The most common failure is in the drive transmission. It is a shop job with a few special tools to replace them, and the cost is fairly close to the cost of a new washing machine.
you fix it with tool and stuffyou don't break itmake sure you use it right
Well in the first place it depends what is wrong with it - YOU haven't told us that. - A washing machine is a very complicated machine and can have many problems -not even many handymen fully understand them. In your case, I would recommend calling an appliance technician.
To get a washing machine repaired, one could typically go to an appliance engineer for a repair. If one is not available, the washing machine may have a warranty on it to get it replaced. If neither of these solutions are possible, then a plumber may be able to fix the problem if it is a problem with water flow.
The procedure will differ depending on what's wrong, but here's an overview of common things that can go wrong and how to fix them: http://home.howstuffworks.com/how-to-repair-a-washing-machine.htm
If your washing machine is on the fritz give Chicago Air Conditioning, Heating and Appliance Repair a call, they might be able to fix it. They have a four out of five rating on Google. 866 625-9239
You throw it out and by a new one.
The water cut off device is stuck in the full position. -You don't say what kind of machine, or else I could tell you how to fix it.