answersLogoWhite

0


Best Answer

If your engine is full of oil, drain off a quart of it. It's messy and you have to be quick or you might drain it all. With the engine a quart low add one quart of MARVEL MYSTERY OIL. Drive the car about a hundred miles, include some high speed highway miles. Now do a regular oil and filter change with HIGH QUALITY (NOT WAL-MART OR OTHER NO-NAME BRANDS) 5w30 oil. I prefer Castrol and Valvoline. This should quiet it down. If it does quiet down, change oil again at only 20,000 mile intervals for the next couple of changes going back to the recommended 10w30 oil.
The marvel oil flushes caked-on deposits from your lifters as well as from the rest of your internal parts. If the Marvel oil doesn't help, you need to replace the hydraulic lifters.
I wish you good luck.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

remove intake and valve covers, loosen rocker arms, remove push rods, and take the lifters out, replace lifters and put everything back to torque spec. Book time is about 3 hours.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

As far as I know, they are not adjustable. But this is not for certain. Just what I have found out so far. Good luck!

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

You have to remove the cylinder head to access lifters.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you fix noisy lifters on a 1995 Jeep Cherokee 4.0 liter?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change lifters on a 1995 jeep cherokee Laredo?

You have to remove the cylinder head(s) to access the lifters.You have to remove the cylinder head(s) to access the lifters.


What is the towing capacity 1995 grand Cherokee 4.0 liter?

3,500lbs


How hard is it to replace the lifters on a 1995 Chrysler 3.8 liter v-6?

It is difficult, the cylinder heads need removed.


How do you replace lifters on 1995 S10 2.2?

is a 1995 s10 2.2 have solid or hydrilic lifters


Where is the location of the Camshaft Sensor on a 1995 5.2 liter V8 in Jeep Grand Cherokee Orvis Edition?

On my 97 jeep grand Cherokee, with the 5.2 liter v8, its located in the distributor, under cap & rotor.


How do you fix a 1995 Mazda 626 that has recently had an oil changed and the clicking sound is still present?

The ticking may be due to any of a number of things, including worn lifters or noisy injectors. Is the ticking louder after the engine warms up? This would point to noisy lifters, since the oil thins slightly as it heats up. Have a reputable mechanic determine where the noise is coming from and whether or not it's anything to worry about.


Is a 1995 Cherokee obd2 compatible?

No, 1995 is OBDI.


What is the weight of a 1995 Jeep Grand Cherokee?

THE WEIGHT OF 1995 JEEP GRAND CHEROKEE IS 1.5 tons to be approximate.


What is the 1995 jeep Cherokee overdrive transmission?

The automatic transmission in a 1995 Jeep Cherokee is an AW4. The automatic in a Grand Cherokee is a 42RE, also called an A500.


Where is the oil pressure sending unit on a 1995 Jeep Grand Cherokee limited 5.2 liter v8?

The oil pressure sensor is on the top rear of the engine, next to the distributor.


What size engine is in a 5.2 liter 1995 firebird?

There was no 5.2 liter engine in a 1995 Firebird


What is the firing order for a 1995 Jeep Grand Cherokee Laredo diagram?

What is the firing order for a 1995 Jeep Grand Cherokee Laredo?