Bad break light switch. It is located on or near the brake pedal swing arm.
Try looking at http://z31.com/repairs/brakepedal/
Also check the installation of the bulbs in the rear lights. If they aren't seated right, they will connect the brake light circuit with the running light circuit. Weird symptoms, and not that rare.
You are getting a feedback voltage from somewhere. Take it to a garage that has a good electrical mechanic as this purbably will be a hard one to find.
The ABS (Anti-lock Brake System) detects a problem with the system. The ABS light will remain on until the problem is fixed. Once the problem is fixed correctly the ABS light will reset itself.
One day, the day the sun stays out the longest or stays out the shortest!
The duration of The Kid Stays in the Picture is 1.55 hours.
The duration of The Midget Stays in the Picture is 540.0 seconds.
The first time he stays the night at kagomes house is in episode 82
=I don't know about the brake lights. I know that most cars, when you turn it off and get out, the head lights and main backlights stays on for a while but then goes off. The brake lights? Maybe it's the way that car is or something is wrong with the brake or you have it on wrong.=
check brake fluid
The brake lights work without the key on, so you have a problem with your brake light switch.
brake light plunger switch on the brake pedal maybe faulty, remove it and connect the two wires together and pull apart and see if lights go on and off
my brake lights stays on wile driving how can i fix it
The 2001 Chevy Blazer brake lights may not work and the third bake stays on because the current light needs to be replaced. A replacement brake light can be purchased at an Auto Parts store like Pep Boys.
abs light stays on
there is a brake switch under the brake pedal. This is a button that pretty much controls the break lights. you might need to replace this or look through the fuse box under the hood. (blue 15) is the fuse that powers the brake lights.
The brake indicator light tests continuity to your brake lights and activates if continuity is broken. This means one of the bulbs is out or there is a problem in the wiring to the lights. The light also comes on when you start your car and stays on for a few seconds along with the flashing "check" signal on your dash. If you wait or push the check button above your rear view mirror the lights should go out. If the brake indicator light doesnt go out check your brake lights and make repairs if necessary. The light should function correctly after the bulb is replaced or wiring is repaired. If not you may have a malfunction in your active check control system wich is behind the panel of lights above your mirror.
If parking lights stay on after the car is turned off on a 2001 Hyundai Elantra than the brake switch is malfunctioning. The brake switch turns off when pressed in and if it does not work the lights of the vehicle will stay on.
Check BRAKE fluid level. Or is it a "tail lamp" warning? Y-THINK-Y
depending on the car, it can mean a couple of things. For example, the hand brake is not fully disengaged, or the sensor isn't registering that it is disengaged, it could also mean that you have one of your primary brake lights out or in some models, it could indicate that there is a malfunction or deficency in the brake system in which case you should have it checked.