 |
How do you flush the radiator in a 1991 Buick Skylark?In: Buick Skylark |
[Edit] |
Answer
It is easiest to remove the thermostat and drain the radiator by removing the lower hose. Dispose of the coolant properly. reinstall the lower hose and run water from the garden hose through the engine with it idleing until it runs clear. Then remove the lower hose to drain the radiator and reinstall the thermostat with the spring toward the engine. Then fill the radiator with coolant and start the engine up and top off the radiator after the thermostat opens. You should end up with about a 50/50 mixture of coolant and water. Good Luck Joe
First answer by Joe JOhns. Last edit by Joe JOhns. Question popularity: 63 [recommend question]
Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > Buick > Buick Skylark > How do you flush the radiator in a 1991 Buick Skylark?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
