0
How can you remove aluminum foil that has melted on to my oven?
Wiki User
∙ 12y ago
Naval Jelly! Go here: http://www.howtocleanstuff.net/how-to-remove-melted-aluminum-foil-from-the-oven/
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What would cause aluminum foil to disintegrate in a convection oven?
Aluminium foil disintegrates in a convection oven because the heat rays of the oven hits the aluminium foil but gets reflected by the foil. Thus, the oven over heats and the aluminium foil disintegrates.
What is an fact on aluminum foil?
it can go from the freezer to the oven to the freezer.
Is aluminium foil unsafe for oven cooking?
It is done all the time! You do want to avoid too high a heat, it will cause the aluminum foil to break down. And acidic foods are not good to cook in aluminum of any sort such as foil or pots and pans.
What does aluminum foil have that plastic wrap don't have?
Tin foil can be used to cover meals in the oven to keep, conduct, and retain heat.
Why do pans in ovens get hot but not aluminum foil?
Actually, aluminum foil does get hot while in the oven. But, when you take it out, it cools very quickly because it is such a thin sheet of metal foil, especially compared to the heavier metal pan.
Can you put aluminum foil in a toaster oven?
Yes,Because it will not affect the toaster's heating system.
Why is aluminum used in foil?
It's inexpensive, it's non-reactive with food, it stands up to heat in the oven, and it maintains its strength when rolled to the thinness needed for foil.
I put aluminum foil in the microwave and it arched and caused a burn on the back of the oven so is it safe?
Not until you remove the foil. Don't use Gold or silver trim dishes in it either - or any other metal objects. Pretty fire display tho - wasn't it?
How do you remove melted aluminum foil from the bottom of the newer model self-cleaning oven?
With the older models of self-cleaning ovens one could put aluminum foil on the bottom tray of the oven, but with the newer models there is a warning (hidden in the last line) of your booklet for models of stoves where aluminum foil should 'not' be used! Even though print in small and many consumers are complaining regarding their stoves and melted aluminum stuck to the bottom tray of their oven (nothing will get it off) all manufacturer do 'not' cover this problem under warranty and thus, it will cost you $44 to buy a new tray. You unscrew the two screws to the bottom of the damaged tray of your oven and then install the new one and put back the screws. Letters of complaint should be written to the manufacturers to have them put this warning in clear bold print right on the front cover of the instruction brochure.
Can you put metal or aluminum in a cooking oven?
Answer: No! Do NOT put aluminum foil in the bottom of an oven, I did that and it ended up melting and baking on the bottom of the oven and it's almost impossible to get it off.
Can you heat aluminum foil in a microwave?
No. The metal will reflect the microwave energy. The problem with metal of any sort (whether aluminum foil or silverware) is that it can produce an arc inside the cavity of the oven. This can start a fire, and it presents an enormous hazard. Can you use aluminum foil in a microwave oven? Read on. Though it is possibe to use aluminum foil inside a microwave oven, it should only be used if the manufacturer's instructions tell the user how to do it (and the user follows the directions). The microwave oven isn't a good choice to heat the foil itself. Aluminum foil (or any metal foil) will reflect the microwaves and not get hot. If the foil is crumpled or if the foil is near the metal wall of the cavity, that foil can act as an antenna, and the voltages can be extremely high causing arcing. That's bad. It could start a fire. Using a microwave just to heat foil is a poor choice.
How do you remove melted aluminum on the bottom of the closed heating element from the oven?
Depending on how severe the bond of the melted aluminum is to the oven bottom, there are two ways to resolve this problem. If very severe, the option is to replace the bottom plate which would probably cost only $30. If the bond melted material is only minimal, caustic soda can be used to clean it out. Use rubber gloves and the area must be properly ventilated?æbefore starting as the chemical reaction of caustic soda releases fumes that are harmful if inhaled.
