White vinegar has been proven to work time and again to remove hard water stains from toilets. See the step by step method below:
Natural Formula to Use:
Pure white vinegar
Method to Use:
1.Fill a clean spray bottle with pure vinegar
2.Spray the vinegar freely over the toilet and wait for a few minutes
3.If stains are stubborn spray more vinegar and wait a while longer
4.Simply wipe away with a clean cloth to reveal the shine
Tips:
For toilet bowls add 1 liter of vinegar to the bowl itself and scrub with a toilet brush to dissolve away hard water stains that has built up over time. Also, by adding 1 liter of pure vinegar to the cistern (tank at back of toilet) this not only removes any stains from there but also removes any from underneath the rim on the next flush!
Sometimes stains are extra stubborn - for this make a paste of white vinegar and baking soda and scrub gently with a soft brush or sponge. Never use an abrasive cleaner like scouring pads, powders or steel wool as this will scratch the surface.
Use a mild acid (e.g. vinegar, phosphoric acid).
Most solid color stains are water-based, and most semi-transparent stains are oil-based - therefore, you cannot mix the two together for good results. If you are not sure which variety you have, check the label for "cleanup" instructions. Oil-based stains will require mineral spirits for cleanup. Water-based stains require soap and water only.
I don't think so because then it has nasty toilet water on it
A single half-gallon blue mason jar by Ball sells for around $17.00. This is providing the jar has no rust stains, hard water marks, chips, or cracks.
water based primers will not hide/seal stains as well as other types.
There are hundreds of shades of stain in all kinds of medium. I personally prefer gel stain as I find it easy to work with. Other people use liquid stains in water base or oil base.
Iron in the water would cause rusty stains in the toilet.
The main ingredient in The Works toilet cleaner is hydrogen chloride. That is hydrochloric acid when mixed with water.
Kaboom! Kaboom!
Skidmarks account for 84.7% of all brown marks in a toilet bowl . Followed in a distant second place by Iron in your water.
toilet cleaner, or Windex if it is the outside of the toilet bowl.
Any good toilet cleaner will remove the stains.
YES, it's is the calcium that makes the water "hard". That is why you use a cleaner that has a calcium remover in it to get those hard water stains off.
If there are urine stains in your toilet bowl, pour a generous amount of bleach into the toilet bowl and under the rim, then leave overnight. The next morning, flush the toilet and pour more bleach into the bowl and scrub with a toilet brush.
Hard water is a term that means the water has lots of minerals - hard water stains are solid deposits of those minerals left behind when the water evaporates. The water initially dissolved those minerals because it was acidic - a weak acid such as lemon juice or vinegar is usually pretty good at removing these stains; or a scrubbing paste made of baking soda and water.
White vinegar is the usually the best method for removing hard water stains. When it comes to cars however it must be noted that the vinegar is acidic and care it must be taken not to damage the paintwork. A diluted solution of 2:1 ratio of white vinegar and water is very effective in this case and if rinsed off thoroughly with clean water it removes hard water stains in no time.
scrubbing real hard with soap and water
You can find the removal hard water stains at some store like homedepot or lowes. You can also find it on some websites like amazon or ebay for the good price but have to wait for shipping time.