0
try using a pick or two and if not remove lock cylinder and tap it hole down sharply to see if you can get it to come closer to the outer area of the lock & then pry it out with a pick or a pair of tweesers
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Steering column lock?
Steering columns commonly lock when the ignition key is removed. If the key doesn't want to turn and unlock the column, shake the steering wheel side to side to try and release it from the binding lock while turning the key.
Your steering wheel is lock and your key will not turn what should you do?
Put the key in and move the steering wheel until the key can turn
How do you remove lock barrel on sprinter?
how do i change locks on lt35 due to key snapped in barrell
How do you unlock the ignition and steering wheel on a 1989 Chevy Celebrity?
If you have the key and it won't turn the lock cylinder try jiggling the steering wheel while turning the key. If the steering wheel lock is merely jammed that should loosen it enough to turn the key. On the other hand if you don't have the key or the lock itself is jammed you may want to replace the lock cylinder.
Your key on your 1998 Pontiac grand prix will go in but will not turn?
Jiggle the steering wheel as you turn the key. I've owned several cars in which the steering wheel lock wouldn't let the key turn if there was any pressure on the steering wheel lock.
Does a 2004 mustang have an ignition key steering lock?
Yes
Why wont the steering column turn?
Older Chevy's have a steering lock when the key isn't in the ignition.
1988 gmc safari Steering column switches and ignition key lock cylinder replacement?
1988 gmc safari Steering column switches and ignition key lock cylinder replacement?
Why wont key turn in my 206?
Try turning the steering wheel whilst turning the key, most peugeots have a built in steering lock.
Why will your key not turn if it is in park also the steering wheel Will Not Lock at all?
The key cylinder has failed.
Steering wheel won't lock on my 2002 trailblazer?
try and put your key and shack the steering wheel
Would you replace both the Steering Lock Assembly and or just the ignition lock tumbler for a 1983 Mercedes 300 SD that you have to jiggle the steering wheel to get the key to turn in the ignition?
Replace just the steering lock unit. The tumblers are old, and they need to be replaces. After replacing the lock, go to a locksmith, and have him re-key the doors to match your new ignition lock.
