 |
How do you get the door panel off of a Chevy Cavalier?In: Chevy Cavalier |
[Edit] |
Answer
BE SURE YOUR WINDOW IS ROLLED DOWN BEFORE ATTEMPTING THIS - YOU WILL ALSO NEED A PHILIPS HEAD SCREWDRIVER - This is for a 2000+ cavalier coupe...
(STEP 1) Remove the 2 screws that are in the door handle.
(STEP 2) Using a door handle remover found at your local auto parts store for about 3 bux, or better yet, a butterknife...remove the pin holding on the window crank handle (The pin looks like a horseshoe kinda) Then remove the crank handle.
(STEP 3) Remove all the screws along the perimeter of the door panel, I think there are about 5.
(STEP 4) Now just pull the panel out and up. If you here small "snaps" it is normal because it is also held on with clips. ENJOY!!!
First answer by Ampinada. Last edit by Ampinada. Contributor trust: 121 [recommend contributor]. Question popularity: 82 [recommend question]
|
Research your answer: |
- Chevy cavalier pulls to the right when you accelerate and pulls to the left when you take your foot off the accelerator?
- How much would it cost to repair a blown head gasket on a 1996 2.2liter chevy cavalier?
- What is the stereo wattage for a 1999 chevy cavalier stock stereo?
- Can you give me step by step instructions on how to install a blower motor for a 94 chevy cavalier?
Answers.com > Wiki Answers > Categories > Cars and Vehicles > American Cars > Chevrolet > Chevy Cavalier > How do you get the door panel off of a Chevy Cavalier?
Our contributors said this page should be displayed for the questions below. (Where do these come from ) |
| If any of these are not a genuine rephrasing of the question, please help out and edit these alternates. |
