0
to get the spanner (or service me now) light off all you have to do is turn the ignition on while the engine is off and hold in the trip meter reset button for six seconds or so.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you reset the service alarm on a falcon el?
igntion off. press and hold down on the button on the dash. turn ignition on. and wait for the spanner to disappear. turn igntion off. don't be alarmed if the trip meter resets cos it will go back to normal when the spanner light is removed from the dash.
Can you tell me how to cancel out the service spanner on the dash on my 1995 Ford Falcon?
With motor off and ignition on (all red lights on) press and hold the button until the dash makes one single beep.
What is the red light flashing on your instrument panel after you turn your Ford Falcon off?
Smart-lock Alarm System Immobilizer
How do you turn the red spanner service light off on a 2004 ford transit van?
turn ignition to position 2..press brake and throttle together for 15 seconds..light will flash..release and switch off...done!
How to take intake manifold off a 1994 Ford Falcon ed?
how to replace intake manifold for 1994 ford falcon ED
How do you get the hub off the axle of a full size 1995 ford bronco in order to remove the rotor?
You have to have a spanner wrench. One you have that, remove the safety ring, use your spanner wrench, and it comes right off.
How do you get rid of service spanner on au falcon?
with ignition off hold done the button on the instrument cluster. turn ignition on. wait about 10 sec. the trip meter may reset but it will reappear to what it was before resetting the spanner symbol if done right. if done right. the spanner should dissappear.
How do you open door on a Ford Falcon 1987 model that is stuck between open and closed?
there is no such thing as a 87 ford falcon There is such thing I have a 1987 ford FALCON GL (bench, colomn change) mean as LMAO And about that door take panel off inside thecar check that out.
Diagram how to change indicator bulb peugeot 206?
The Peugeot 206 is a subcompact car. One has to remove the full light to change indicator bulb. A spanner can be used to remove the light cluster. Break the spanner off, and rebuild.
Why Vauxhall combo amber light on showing car with spanner in it?
The Amber light with a Spanner in it is a Service light. Telling you that the vehicle is in need of a service (Replacing the Oil, Oill Filter, Air Filter etc.) Your Vauxhall Dealer can take the amber light off using Tech 2.
The light with the spanner and oil can light comes on my ford transit van i have given it a oil filter and oil change and topped up all fluids what could it be?
turn ignition on in van, but do not start. press brake pedal and accelerator pedal at the same time. after about 30 seconds light with spanner will start to flash. turn off ignition. by doing this it resets warning lights. start engine, should be ok now.............cheers Michael
What does spanner warning light mean on citreon saxo?
The spanner light means that the car is due for a service it can be switched off when the car is serviced at a dealer garage or other compitent places if you have serviced the car yorself then obiously it won't go off. i've had the light on my car for the last few months.if the car has been serviced just ignore it
