Pull the front plug and turn the engine until it breathes on you w/ pressure through the plug hole. then put a dial guage rod into the plug hole and when it reaches top, that is TDC
Edit: A dial gage rod is not needed, anything that will fit into the spark plug hole will do. You can be sure your on TDC by looking at the crank pulley there are lines on the pulley and a pin sticking out from the front of the engine make sure the second mark from the right on the crank pulley line up with the pin
Yes, late model bumpers will fit on 89-90 240sx
how many quarts of engine oil does 89 240sx takes
NOT VERY ,130HORSEPOWER............
I have a 91 240SX and had a similar issue, my Fuel Pump had to be replaced.
its the chassis code for 89-94 Nissan 240sx
15btdc
Yes, even though the front bumpers are different the fenders are the same
The easiest engine swaps for a 240sx would be an sr20det or a ca18det as these require no modification to the motor mount location.
how the transmission module works
it will take lots of time and modification, just get it done by a shop
I bought a 89 240sx from my buddy, he had a 92 parts car and i replaced both fenders and the front bumper on the 89 with the 91 parts. In order for the bumper to fit you have to replace the inner 89 bumper with the 91.
NO, to pass smog test, it all needs to be original