![]() |
How do you hook up a DVD player a VCR and a game through a satellite cable box if you have a new JVC television with four outputs or inputs? |
[Edit] |
Answer
Easiest/fastest way. Run the sattelite coaxial cable to the "sattelite in" jack on the back of the sattelite reciever, run a coaxial cable from the "out to TV" jack of the sattelite reciever to the "antenna in" jack on the VCR and a coaxial cable from the "out to TV" jack of the VCR to the "antenna in" coaxial of the TV. Then, run audio/video cables (red, white and yellow) from the "video out" (yellow) of the DVD player to the "video in" of the TV and the red and white cables out of the DVD to the red and white jacks of the TV. Audio out (left and right) of the DVD to audio in of the TV. If the TV has 4 in/out jacks to accept component (red, white yellow) cables, run the component cables from the out side of the sattelite box, VCR, DVD and video game seperately to the TV inputs, 1,2,3 and 4. You would then simply use the TV remote to change inputs to switch from component to component. The only coaxial would be the sattelite signal from the dish to the sattelite receiver.
First answer by Veeper. Last edit by Veeper. Contributor trust: 113 [recommend contributor]. Question popularity: 42 [recommend question]




