You will need:
A stereo amplifier
Speakers
An optical audio cable
1) Connect the HDMI cable from whatever you are trying to hook up (Virgin Box, Blu-ray player, PS3, Xbox 360) into the back of your television.
2) Connect the optical audio cable from the back of your television to the slot on your stereo amplifier.
3) Your amplifier should be connected to the speakers. If it isn't, do so (it should be covered in the manual)
4) You may need to configure Dolby Digital 5.1 Surround Sound for it to work.
5) Ensure the amplifier is turned on.
Alternatively, you could connect your optical audio cable directly from what you are trying to rig up to the stereo. Either way should work.
I hope that helped.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
An HDMI cable connects from the Bell cable box to the surround receiver and then to the TV.
You'll need a receiver with at least 2 HDMI inputs and 1 output, as well as an HD-capable cable box. Connect the XBOX and the cable box to the receiver with the HDMI cables, and then plug the HDMI output on the receiver to the TV.
If your receiver has an HDMI input, use that. If it doesn't, then you will have to use analog or digital audio connectors to plug it in.
No, you will need a surround sound receiver or amplifier with 5 speakers and a subwoofer to hear surround sound.
check your surround sound if it has an HDMI or AV input jacks. if it has, then you are good to go. from your satellite receiver, attach the HDMI cable or AV cable. connect it to your surround sound. after connecting the satellite receiver box and surround sound, attach the HDMI or AV cable from the surround sound to your television.
An HDMI cable connects from the Bell cable box to the surround receiver and then to the TV.
You'll need a receiver with at least 2 HDMI inputs and 1 output, as well as an HD-capable cable box. Connect the XBOX and the cable box to the receiver with the HDMI cables, and then plug the HDMI output on the receiver to the TV.
Connect a Home theater system with your HDTV and Plug the HDMI cable into it.
The optical output of the PS3 can be connected to older surround sound receivers. Newer receivers can be connected with the HDMI cable.
If your surround receiver has HDMI, connect an HDMI cable from the NeoTV to the receiver, and then HDMI out the receiver to the TV. If you don't have HDMI on your receiver, you can connect an optical cable from the NEOTV to the surround receiver.
If your receiver has an HDMI input, use that. If it doesn't, then you will have to use analog or digital audio connectors to plug it in.
There are essentially two ways to get surround sound out of the Xbox. Via HDMI or via optical (TOSLINK) out. If you have the component video cable, then the end that attaches to the Xbox has an optical out port. Simply attach this to the optical in on your home theatre receiver with an optical cable. If you want to use audio via HDMI, in order to get surround sound you'll have to have an HDMI receiver capable of receiving audio. In this case run the Xbox via HDMI to the receiver and then the receiver via HDMI to the TV. The HDMI will send both audio and video. If you have the official Xbox HDMI cable you can also connect the HDMI cable directly to the TV and use the optical out connector that it comes with instead.
No, you will need a surround sound receiver or amplifier with 5 speakers and a subwoofer to hear surround sound.
hook up your ps3 to your television (with HDMI cable) and depending on what kind of television you have, you need to send the audio out to the sound system. I used an optical cable for the best quality sound. Now, no matter what is hooked up to your television, it will go through your sound system.
You take an HDMI cable and plug it into the HDMI port on the back, or side, of your TV. Than you take the other end and plug that into the HDMI Out port on the back of your receiver.
The KLV32ex400 has no surround output capability. The only audio output is a stereo 1/8" headphone jack. If you are using a Blu-Ray or HD cable or satellite receiver, you can run an optical or coaxial digital cable from those directly to the receiver for surround sound.