How do you install a child seat in a 2002 pulsar hatch?
Answer . My child seat car bolt, is in a 1988 Sundance, passenger side about 1 ft from behind back seat, on trunk floor.
Answer . We would need to know the state. You may want to call your police department and ask them about it, they can also help you put it in right. I know where I am, you… can't put a child in the front seat of any truck or car.
Installing an infant car seat in a 2002 Hyundai Santa Fe depends onthe car seat you purchase. There are different connectors withevery seat, so it is best to follow the instru…ctions step-by-step.
The car seat should have directions on the basic install on theseat and in the directions. Local fire departments inspect carseats and will help get it in correctly.
First, ensure that the child seat is not in front of a working airbag. If installing in the passenger seat, disable the airbag.Otherwise, install as normal using either the LA…TCH system or theseatbelt.
Nissan pulsar radio pin 4362 Nissan pulsar radio pin 4362
you gota have the base to the car swat .third row is probably not an option unless second row seat is down. this goes for booster seat too=it tilts when driving
Infant snugride car seat http://www.youtube.com/watch?v=ROpOJBsS1og BEST ONE!! Check it out http://blog.gracobaby.com/2009/07/10/graco-car-seat-installation-videos/
are you serious?? im sure there are directions in a packet that comes with a child seat when you buy it.
I have a Nissan Pulsar 2002 hatch back but i cant find where the baby seat attaches too can someone help me out?
they are located on the verey back wall of all hatch back if u cant see them u may have to get them fitted
The clips underneeth the cushion are made in kind of a wierd "C" shape. When you pull up on the seat cushion the clips stay with the floor bracket. Sqeeze the clip together so… to remove them from the floor. Look at the bottom of the cushion now. It is made with a "U" shape, with a "STRAIT" wire above and behind it. Now coming from the rear of the cushion with the clip, insert the "U" on the cushion into the middle of the "C" on the clip and then the top of the "C" onto the "STRAIT" wire that is on the cushion. Then get the seatbelts in place with the cushion inserted all the way and with the clips inline with the floorboard holes, and push down on the cushion above the clips.
Yes, just as long as theirs seatbelts present.
Hild safety seat installation can be due to the variety of seat belt configurations vehicle and child safety seat designs?
Open the rear tail gate. Directly under the boot 'lip' there is a preinstalled restraint. It is right under the lip, where the latch is. There are also 2 points, 1 either sid…e of the boot floor, however no restraint has been fitted. You have to remove the black gromet, then install the anchor and bolt.
at the front of the boot x