0
You need to start by running a piece of ice and water shield 36" wide up the valley against the wood, then run felt on the shorter rafter side and lap past the valley 12"-18", now run the felt on the other side and cut in the valley with a hook blade careful not to cut through bottom layer of felt. now run a metal valley piece up the valley if using more than one piece start at the bottom. now run your shingles past the valley center all the way up now chalk a line 3 inches from the center of the valley and cut again with hook blade, careful not to score the metal. now repeat the on the other side. you should use a metal valley with a "v" bend in the metal to slow water from rushing under the shingles especially if the pitches are different.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
How do you open Mazda Miata roof?
there is no roof on them to open
Is a Mansard roof difficult to install?
A mansard roof is difficult to install due to its shape and structure. What makes a mansard roof so difficult to install is that there are 4 sides all of which have different slopes.
What is the culvert called where the roof joins the gable?
I believe you are referring to an area of the roof called a valley. A valley is formed anywhere the downward slope of two roof surfaces meet.
How much to install a asphalt arch30 year roof?
To install the Asphalt Arc30 year roof depends with the materials that you will use.
How do you roof a valley on a metal roof?
Valley trim is usually installed onto the roof preceding the actual roofing panels. If you are using standard panels with W-Valley trim (or similiar) the Valley trim is screwed directly into the lathe using "Quick-Drill" (metal-to-wood) screws.
How can one install roof flashing?
One can install roof flashing by various steps. You can find these steps on several websites. A website you can look on for installing roof flashing is YouTube.
What is it when there is two slopes of the roof meet?
Valley.
How do you install a skylight?
Install the sill flashing first, according to the manufacturer's instructions. As a rule, flashings are nailed into the curb and sometimes cemented to the roof with plastic roof cement, but not nailed to the roof.
Do you have to stagger roof tiles when you install them?
yes.
Do you install valley flashing with a vent in the valley?
There should not be a vent penetration that close to a valley.
What is a valley on a roof?
a valley is where two sections of a roof meet to form an inside corner . example a gable (peak) porch coming out of the center of a roof in the front of your house would have two valleys one on each side
How do you layout composite roof shingles on a roof with mid gable and valleys?
Layout from edges end in valley
