answersLogoWhite

0


Best Answer

Jack up car and support with stands. Remove wheel. Remove 2 bolts (probably 17mm) at the top and bottom of the caliper. Lift caliper off and hang it from the spring with a heavy wire or coat hanger to prevent damage to the hose. Remove rotor. The rotor usually rusts onto the face of the hub, so it may have to be rapped a few times with a hard mallet (NOT a hammer) to break it loose. Remove outer pad. If car has ABS, loosen bleeder valve first, then compress piston. If no ABS, just compress piston. Install new pads and rotor. Reinstall caliper, ensuring that the bolts are tight. Reinstall wheel. Remove stands. Lower car and do final tightening of wheel lug nuts. Have a beer. :)

User Avatar

Wiki User

8y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you install rotors and brake pads on a 1995 Mazda 626?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the rotors on a 1995 ford bronco 4 wheel drive?

Tap on your 1995 Ford brake rotors with a hammer or mallet?æto loosen them. Slide the rotors off. Reverse the process to install your new brake rotors.


How do you change the front brake rotors on a Chevy Cheyenne 1995 2500 truck 4wd?

You will need to remove the tire and wheel from your 1995 Chevy Cheyenne. Remove the brake assembly. Tap on the rotor with a hammer or mallet. The brake rotor will slide off. Reverse the process to install the new brake rotor.


Why does 1995 Honda civic EX shakes while braking?

could be bad rotors, or brake pads wearing unevenly, which would result in bad rotors.


What type of brake fluid does a 1995 Mazda 626 DX use?

DOT3


Where do you place and install the thermostat in a 1995 Mazda b2300?

how du you replace a thermostat in Mazda pickup b2300 94


How much do the rotors cost on a 95 Oldsmobile cutlass?

The 1995 Oldsmobile Cutlass brake rotors will cost approximately $40 per wheel. The rotors can be as cheap as $25 at some discount auto-parts stores.


How do you install valve cover gasket on 1995 Mazda mpv?

instructions on how to install engine valve cover gaskets on l996 Mazda mpv van with 3.0 engine.


How do you adjust the parking brake on a 1995 Mazda 626?

The majority of time if you adjust the rear brakes it will adjust the park brake.


Where is the brake proportional valve located on a Mazda Protege 1995?

behind the engine on the firewall


How do you change the brake booster in a 1995 GMC Jimmy?

Begin by removing the brake lines from your 1995 GMC Jimmy brake booster. Remove the brake booster retaining bolts. Reverse the process to install your new brake booster.


How do you replace the front brakes on a 1995 ford ranger?

What are the brake rotors minimum thickness on a 1997 Buick Century? Thanking you in advance.


Why does 1995 Acura Legend shake when braking?

More than likely you have warped rotors. Have the rotors and brakes inspected. If the rotors are not too bad and have not been turned before they can be turned and trued and used again. You will also need new brake pads.