Answers.com > Wiki Answers > Categories > Cars & Vehicles > European Cars > Saab > How do you install Saab drive beltwhen tension pulley bolt is stuck?

How do you install Saab drive beltwhen tension pulley bolt is stuck?

In: Saab [Edit categories]

Answer:

Answer

the tention pulley bolt is not stuck. It is supposed to be that way take a 1/2 " or 3/4 rachet or breaker bar and put it in the square hole and use the breaker bar to get leverage to move the tention bar so that tention is off the belt to rmove belt and do the same to install belt

First answer by ID3451679881. Last edit by ID3451679881. Question popularity: 13 [recommend question].

[report abuse]

Can you answer these Saab questions?

	How do you hot wire a Saab?	Answer it!
	What is rough idling?	Answer it!

Relevant answers:

How do you get a stuck crankshaft pulley off i have the bolt out it is stuck?
It takes a special puller to remove the balancer. Advance auto parts stores will loan it to you. It is called a harmonic balancer puller.
Which pulley exactly is the tension pulley?
It will be one of the smooth ones with no ribs.
How do you remove the tension on the tension pulley?
It's function is to keep the tension on your serpentine belt at the correct tightness. On most vehicles you will need to take the tension off in order to change the serpentine belt. On many vehicles...
How do you install tension pulley on a 1994 Pontiac transport?
First, remove the belt. Then, remove the puller mounting bolt. They pulley will slide off. Note that if you turn the bolt in the wrong direction, you will crack the tensioner and it must be replaced....
What is tension in a bolt?
This is how tight the bolt is done up, the manufacturer will specify this is newton meter or foot pound. You will then need a Tourque wrench to measure the force as you tighten the bolt.