How do you install the belt on a maytag dryer with the model number HYE2460AYW?

Answer 1

You're gonna need a flat head screwdriver, flashlight and a can of Raid. Get access to the back of the Maytag "HYE2460AYW" Dryer. Just under the control panel you will two hinges, one on left, one on the right. Remove these screws. You will now be able to open the top of the dryer, as if it were talking to you. Have someone help you hold open the top or prop it open wisely! You are now inside. On the inside you will need to remove two screws located on both left and right upper front corners. Note the white wire on the right side. These screws are holding the front of your dryer (door included) to the other three sides. Once both screws are removed cautiously set aside the front keeping mind of the white wire. You now have complete access to the guts of your dryer. To replace the belt, you need to wrap the belt around the dryer drum and the motor found under the drum. Screw screws into their proper holes. Done.