0
I have a 1990 Chevy Lumina and when you hear clunking sounds when going over bumps or dips or if you have ever replaced your strut assembly you should replace the mounts. You can buy a quickstrut online for a lumina. Front is around $180 and rear is around $80. Hope that helps!
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Do strut assemblies come with strut mounts?
no
Does a 1992 Camry have struts and shock absorbers in the front or just struts?
All Toyota Camry's have struts in the front. This is also accompanied with strut mounts and bearings that are located between the mount & strut. I highly recommend replacing the mounts & strut bearings with the struts. My experience has shown that the mounts fail before the strut.
How do you know if your motor or transmission mounts are bad?
It is important to know the symptoms of a bad car part. The symptoms of a bad motor or transmission mounts are loss the car part, shaking and lots of noise.
Rear strut mounts welds are braking on my 99 zx2 ford escort is there anything i can do to fix problem?
replace the mounts
99 grand am rattling noise from front end?
It could be your front strut mounts need to be replaced. The rubber inside the strut mounts, wears out. You will hear the noise when u drive over bumps and uneven surfaces. my 2004 grand am se1 4 door ,with the 3.4 v6 engine and automatic transmission, needs the front strut mounts replaced.
1996 Monte Carlo and changed the struts and strut mounts along with new ball joints in the front still have clunking when hitting bumps and when turning the wheels when stopped?
try to tighten all the bolts on the strut mounts and double check
How many engine mounts does a 95 Cavalier have?
There is one on the front passenger side and a torque strut on the front. The torque strut acts like a motor mount.
What would cause a squeaking sound when car hits the bumps and when turning steering wheel?
could be struts and or strut brg plate that mounts the strut at the top
How many motor mounts on a Chevy Impala and where are they?
4 engine mounts. front right, front center, torch strut that supports the radiador, & transmission mount
How do I replace a Cavalier torque strut?
The?ætorque strut mounts help keep the engine and the transmission in place and reduce vibration. There are?ætwo visible bolts that connect the strut to the car structure. Unscrew the nuts and use a hammer to get them off.
How to replace motor mounts in 1995 dodge neon?
You've got 4 mounts total. A transmission mount, then on the other side of the motor, you've got a mount that goes to the middle of the engine that is in the fender, and upper torque strut and a lower torque strut on that same side.
Where are the heater pipe and the upper torque strut mounts on a 94 Grand Prix 3.1 liter engine and how do you replace them?
The heater pipe is at the rear of the engine and the strut mounts are on each side of the engine compartment. These are not easy to repair and you need special tools and a front end alignment ' when you are through.
