answersLogoWhite

0


Best Answer

I usually recommend using a two-part epoxy in a walk-in refrigerator. It dries hard, is very durable and will usually cure out quick enough to limit down time. Always ask for a technical data sheet for specific directions, digest and dry times.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

it is a really good idea to clean most surfaces with TSP. prime most of the surface with either oil or latex based primers. use either enamel, latex or oil based paints. and it is also a really good idea if you choose latex to go with either satin, semi, or gloss sheens. they tend to wipe a lot easier.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

If the coating is for the inside, use a low temperature epoxy coating after checking local food storage regulations. If it's the outside, then an equipment enamel will work well.

Ensure that all surfaces are sound and clean prior to painting and prime any bare metals with the recommended primer.

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

We bought a spray-can of Appliance Paint at Walmart, in the color we wanted, and spray painted it. You can tape off the parts you don't want sprayed.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

If anything, in Tremclad anti-rust paint.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How should you paint the inside of Freezer?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where can you find the paint codes for a 1987 Pontiac Trans Am?

the paint code should be on the inside of the drivers door on a little white sticker. if not there try on the passenger door. the paint code on mine is inside the center console on a white sticker If the paint code isn't on either door or in the console; try looking inside the trunk compartment, it should be a white sticker on the inside of the panel


Why would snow melt in your freezer?

It shouldn't! Your freezer is too warm! It should be set below 0 °C (32 °F) and therefore snow should not melt inside of it.


About Refrigerators with Bottom Freezers?

Though refrigerators with bottom freezers can be convenient, as the freezer allows more of the inside of the fridge to be at eye level, they're more expensive and a bottom freezer tends to hold less. Other than that, their maintenance is pretty much the same as top freezer refrigerators. Spills inside the fridge or freezer should be wiped up at once. An open box of baking soda should be put in both the fridge and freezer to absorb odors. It should be replaced every three months. Foods in the freezers should be stored in freezer bags, which should be dated. The coldest parts of the freezer are against the walls or the bottom of the compartment and items should have enough space between them for air to circulate.


Why is the air inside of freezer more dense than the air outside the freezwer?

Because the movement of the gas-molecules inside the freezer are smaller, and therefore, that more molecules are present in a given volume inside the freezer.. If the temperature of the air outside the freezer, was the same as inside the freezer, the air outside and inside would have the same density - roughly said - because the humidity inside the freezer also plays a role. But in general the above is enough to answer your question.


Can a microwave be on top of a fridge freezer?

Yes. The short waves that bounce around inside the oven should be well shielded from penetrating the freezer ice. Heat from the freezer coils rises, but that should not harm the microwave. Neither device should have any negative impact on the other in that configuration.


When measuring To sale my upright freezer to find cubic feet do I measure inside or outside of freezer?

Cubic feet for a freezer or refrigerator refers the interior storage space. So measure the inside of the freezer.


Do you measure the inside or outside of a freezer to find the cuft?

The inside.


Why would a balloon filled with air in a freezer shrink?

The low temperature inside the freezer causes the air inside the balloon to contract.


What kind of paint do you use for inside a microwave?

You do NOT paint inside a microwave !


Will a freezer last longer in the garage than inside?

The life of the freezer depends on the conditions in which it is housed. If the garage is humid, hot or conversely very cold, then your freezer is better off inside.


Is interior paint good for the inside portion of a window frame?

Interior paint is good for the inside portion of a window frame if it is not exposed to moisture. If it is exposed to moisture one should consider using a different product.


What type of paint should you use in a kitchen?

Preferably paint that has not already dried solid inside the paint can. I would highly recommend this type for most any use on an interior or exterior surface.