0
What kind of paint do you use to paint an outdoor concrete statue?
Wiki User
∙ 11y ago
If you think you might have a moisture problem, now is the time to address it. Place a section of clear plastic on the cement and tape the edges down, but not so tight as to be laying tightly on the cement, and wait overnight. If there is water on the cement, then you have water coming up through the cement, and I would suggest that you not paint your patio at this time. If there is water on the plastic side, then it is just condensation and you should be ok.
First, you need to make sure that it is clean of all mold, mildew and debris. I would suggest using a mixture of 15% bleach to water for the moldy areas. Spray that on and let it kill the mold for a few minutes and then pressure wash to whole patio. Remember, it's always worth it to get it done right the first time.
Next, you will need to acid etch it if it is smooth. If it is rough, then you can skip this part. Mix one part muriatic acid (found in most large hardware stores in the pool supplies section) to 8 parts water. Use goggles, and wear long pants. Wash off your skin immediately if you get some on there. Pour the acid mix on the cement (I usually use a plastic watering can). Use a broom to get the acid mix to all the areas. Depending on the size, you might need to mix a few cans. Don't skimp on getting the mixture spread.
(Quick side note - Don't let this mix get on anything you don't want ecthed. If it is adjacent to other cement, wet the other cement well with plain water, and keep it wet with plain water while you etch near that section. Excessive water will dilute the mix and keep your other cement from discoloring ... but don't get the water on the area you want to etch.)
Once the mixture is spread and has quit smoking, rinse it off with LOTS of water.
Wait till the next day for it to dry.
Take a leaf blower and a broom and remove any sandy residue caused by the etching.
Make sure that you apply a product that is meant for exterior patio areas. H&C makes a decent product that can last for years with proper care and can be found in most large hardware stores.
Your cement patio should be clean and dry at this this time.
Use a paint brush to paint around the area first, including around colums and any difficult to reach areas (this might include the vertical step if you so desire). Next, use a roller to roll on a coat. Let this dry for a few hours and then apply a second coat. Two coats are usually sufficive, but you might need a third. Don't put anything on your porch for at least 24 hours to ensure proper curing time.
Wiki User
∙ 15y ago
Wiki User
∙ 14y agoCement paint. True fact. Go to your local hardware store and simply look for cement paint. However, seek advice and do your research before engaging in this activity because painting a concrete or cement surface is a totally different method than painting drywall or wood surfaces.
Wiki User
∙ 11y agoGarage floor paint, with suitable primer.
Add your answer:
Earn +20 pts
What kind of paint should you use on a concrete sidewalk?
Either concrete stain or block and stucco paint. I painted an eagle statue ,about three year's ago with oil colors and after it dried i put a coat of polycrylic, (by Min Wax) over it and and it still looks great.
Will a heat gun remove paint from concrete step?
It does depend on what kind of paint and how deep it has set in the concrete, but it certainly sounds like a good start to work on.
What kind of paint stands up best to the outdoors?
you use spray paint from a can at a bike or car shop
What kind of paint will adhere to a plastic garbage can in a warehouse. Will any indoor or outdoor paint work where the color stays on the can?
There is special paint formulated for plastics and no other will adhere. It comes in spray cans. Most good hardware stores have it in the paint dept - look for plastic paint. The paint is call Krylon Fusion For Plastics.
What kind of paint do you use to paint concrete outside?
they sell concrete stain. It is made specifically for concrete. If I were you I would use a Dulux product called 'Luxafloor HS' or 'Luxafloor Eco2'. They are both 2 packs - one being oil based and the other being water based. They can be expensive however. If you want a cheaper option then you should you a single pack such as the Berger Jet Dry range. You can also get oil and water based in the same range. The strongest out of all of them is the Luxafloor HS but obviously it will cost you aswell.
What kind of paint should you use on a concrete sidewalk?
Either concrete stain or block and stucco paint. I painted an eagle statue ,about three year's ago with oil colors and after it dried i put a coat of polycrylic, (by Min Wax) over it and and it still looks great.
Will a heat gun remove paint from concrete step?
It does depend on what kind of paint and how deep it has set in the concrete, but it certainly sounds like a good start to work on.
How do you get fingerpaint off concrete?
try pressure washing it off. . .this should lift off that kind of paint or you can use acid wash for concrete
What kind of paint used on the skin of the statue of liberty?
they used green paint. that's why shes green
What kind of paint stands up best to the outdoors?
you use spray paint from a can at a bike or car shop
What kind of noun is the word wildfire?
The noun 'wildfire' is a singular, common, compound, concrete noun; a word for an outdoor fire that is not under control.
What kind of paint will adhere to a plastic garbage can in a warehouse. Will any indoor or outdoor paint work where the color stays on the can?
There is special paint formulated for plastics and no other will adhere. It comes in spray cans. Most good hardware stores have it in the paint dept - look for plastic paint. The paint is call Krylon Fusion For Plastics.
How to Customize Your Outdoor Umbrella Stand?
A large, outdoor umbrella on the patio can lend shade and create a small retreat from the weather and the sun while providing additional decoration to your back yard. Although you can purchase an outdoor umbrella in a number of designs, styles, and colors, the umbrella stand itself is invariably the same. Not only this, but they can be boring and sometimes downright ugly. Luckily, with a few ideas and a little imagination, you can spruce up your outdoor umbrella stand to compliment the rest of your patio furniture. The stand for an outdoor umbrella is generally made of either concrete or a heavy metal. Both of these options lend themselves equally well to any kind of decoration that you want. Metal stands offer more versatility in terms of decorating than concrete stands. They are particularly well suited for decorative painting. Begin by thinking about what kind of design you want to have on your outdoor umbrella stand. A good source from which to draw inspiration is the umbrella itself. Pick out colors, designs, or small motifs that you can use for artwork on the stand. Once you’ve decided that you want to paint on the stand, plan out your drawing on paper before buying any paint. Make sure that your design will fit and that it will tie in nicely with the existing outdoor furniture. When you’re happy with the design, use a permanent felt tip marker to draw your design. If you make a mistake, you can always paint over it. Once you have the outline of your design on the stand, fill in your design with color. You will want to use an enamel paint that is weatherproof. Once your design is complete, let it dry completely before installing the outdoor umbrella. If you have a concrete stand, you can also paint these, but you will need to prime them first so that they can accept paint without absorbing too much of it. Another way to decorate concrete umbrella stands is to cement decorative tiles, shells, or beads onto the base in mosaic patterns. Finally, if you’re not the artistic type, you can always cut out a piece of weather resistant fabric to drape around the stand as a decorative skirt.
What kind of paint should I use on a wooden outdoor table?
First of you are going to want to sand down the wood, this gets off all of the previous paint and readies the surface for a new coat. You can choose to stain it with any color of stain or you can use an exterior paint.
What kind of paint do you use on concrete fountains?
Both the water based paints and the oil based paints can be used on the concrete fountains. However, the oil-based pains are the best as they cannot be washed easily unlike the water based paints.
What kind of paint should I use on my outdoor table to protect it from the weather?
With all due repect to previous answer, that's overkill. Two coats of interior satin or semi-gloss is sufficient. Satin at minimum because the shimmer allows for easy cleanup which is important in the kitchen. Don't spend too much on the paint, no matter what anyone says, their all about the same. You should definitely start with an outdoor paint, or an indoor/outdoor paint. Then make sure to use a water sealer on top and allow it to dry fully before it is exposed to the elements.
How do you paint stepping stones?
The absolute bees knees paint would be an epoxy paint. That is the kind that we used to use on microwave transmission towers. It is also used on garage floors. As an alternative, you might consider using a concrete stain.
