To program the Regency Z30
TURN UNIT "ON"
1. Press "MANUAL"
2. Enter the frequency you want, example 162.475
3. Press "ENTER"
The display will show "Ch_" with the _ (underscore) flashing
4. Enter the number of the channel where you wish to store the frequency.
Note: channels 1 thru 9 must have a zero before them, example 01, 02,........ 09
If you want to add more frequencies at this time, got to step 2.
To lock out a channel, press "SCAN" and while the unit is scanning,enter the channel number. Repeat this action to unlock a channel.
To increase or decrease the scanning rate, press the "SPEED / ENTER" key while the unit is scanning.
To create a delay after a transmission, press the "DELAY" key while the unit is scanning.
You can change the display by pressing the "CHANNEL / DISPLAY" key.
There are 3 choices: display only the channel number, only the frequency,or alternate displaying the channel number and the frequency.
Simply press the SCAN button to put the scanner in scanning mode, then press the number button for the channel you want to lockout or unlock. For example, to lockout channel 5, just press the "5" button while scanning; to unlock channel 5, press "5" again. This works for many Regency scanner models.
(z - 9)(z + 5)
(z + 15)(z + 3)
write a program to print A to Z on screen in c?
3/5z + 45
Specially designed innovations like American Science and Engineering Inc.'s Model Z scanner sought ways to tighten security. The Z-scanner concentrates a high intensity beam of X-rays
You need the programming guide from ZEBEX and the Buyer guides.
45
4z-11=45 4z=56 z=14
45
The Doctors - 2008 Improve Your Health from 'A' to 'Z' 3-45 was released on: USA: 12 November 2010
Z class is discounted business class bought 45-60 out