How to program a DVD player with a Toshiba Television
You cannot program a Direct TV receiver with this remote. The Toshiba TV this was designed for was introduced before the Direct TV HD systems came out. This remote does not control any model of DVR. If you want to control both of these with one remote, get a Logitech Harmony remote.
First, you must find the three digit code for your device. You can find this code at Toshiba's website under the page "Remote Control Codes". Once you have the code, go to the "Mode Select" button on your remote control and select the device you wish to control. Finally, aim your remote control at the device, hold down the "Recall" button, and enter the three digit code.
Sony vcr
0154, 0156, and 0060 is what it says in http://www.hifi-remote.com/ofa/codes-tv.shtml#tv what I need to know is how to get that model to accept the code.
Sharp Aquos is a brand of TV. You can't program it to control another brand of TV.
I have a toshiba CT-90325 TV , i JUST SET IT UP but what I discover when a picture is showing it does not open to full screen, what do I have to do to have the picture full screen? I await your reply. clemont
Only certain models of Aquos TV's have programmable remotes. If yours does, code 26 is used for Toshiba DVD players. Press the DVD-VCR and Display buttons at the same time, and then press 2 and then 6.
The steps to program that remote are listed below! Addressing Remote to TV: 1.) Press and hold the clear TV button until all mode lights light up. 2.) Release and TV light will be blinking. 3.) Enter code and press #. The TV button should flash 3 times. 4.) Try functions (Volume, Power, etc..) and see if it is working. 5.) If no function, repeat steps 1-4 with another code.
Learn Japanese or ask a Japanese neighbour. Better still, take it back to the shop you bought it from and get them to sort it out.
YOu must program it as a Toshiba DVD using the AUX button on remote control and the codes 0695 (which worked for me) or 0503, or 1045.Then seperately set up the volume by changing the volume control lock according to directions. FYI... Comcast could not help at all!______________________________________________________That was a helpful answer, thanks.Additionally, based on my own experience a couple of minutes ago, I was able to program the Comcast remote for the Toshiba TV/DVD combo (Tosh model MD19N1, fyi) by using the AUX button & treating the TV/DVD combo as a DVD, as the answer above suggested. But the code that worked for me was the Toshiba DVD code listed in the Comcast remote pamphlet (specifically, code #20695), rather than the codes stated above. But the answer, above, to use the AUX button & treat the TV/DVD combo as a DVD is what set me on the road to being able to program the remote. Also, the answer suggested above about programming the volume for the remote, by just following the Comcast remote instructions for "unlocking" the volume was exactly right. Also, fyi, none of this programming of the Comcast remote messed up TV/DVD operation by the original remote I have for the TV/DVD. I just didn't want to have to be juggling two remotes all the time.Thanks alot for that answer above. (11/5/10)
outer limits
sync to icloud