Master Key Part from Toyota Australia: 89780-YC030
Remote Key part from Toyota Australia: 89785-26020
Instructions to ADD additional remote for Australian Camry 1997 - 2000 (not sure about 2001 onwards)
1. Make sure all doors and windows are closed.
2. Insert Master key into the ignition cylinder.
3. Cycle the ignition cylinder from On to OFF three times. Please push hard when doing this so that ON OFF action is smooth.
4. The security light on the dash will come on in a steady manner and will not flash.
5. Press the original remote button (single one for the Australian Camry).
6. Then press newly purchased remote once.
7. You are now done.
Instructions to ADD duplicate transponder key for Australian Camry 1997 -2000 (not sure about 2001)
Requires one working Toyota Master Key.
1. Make sure all doors and windows are closed.
2. Insert Master key into the ignition cylinder.
3. Cycle the ignition cylinder from On to OFF five times. Please push hard when doing this so that ON OFF action is smooth.
4. Making sure that there is no one nearby (for safety reasons), Open and close the driver side door 6 times.
5. Remove the Master Key and insert the new duplicate key.
6. TURN THE IGNITION CYLINDER ON. This step is important.
7. The new key will be registered after 70 seconds (There is no indication when programming is complete at least for the Australian Camry. Turn new key to OFF position and Open the door once to complete programming cycle.
8. Take key out and put it back into ignition and turn on engine. The car should start.