If you have a key that is already programmed to your Outlander, use that key first. Place it in the ignition and turn to the "on" position five times. A light should come on your dash (looks like a car with a key inside). Once that light comes on, turn to the off position, remove your first key the place the "new" or unregistered key in the ignition and turn to the "On" position (not start). This should program your key to your Outlander.
how to program a new key 2008 mitsubishi colt
If it has a cover on the key, yes. If it is a steel key no.
You can program a blank key for Mitsubishi Endeavor 2006 using Transponder Key Blank Fits.
Leave windows open & then unlock manually from internal section
How to program a Mitsubishi veranda KE key less clicker
The dealer scan tool is required to program a key on this Mitsubishi built car.
Go to your Chrysler dealer and ask them to program it.
you can program a key if you already have two known good keys. if not you will have to pay the dealer or a locksmith
only a dealership will be able to do this the key has a ohm rating in the chip that the car key solenoids corresponds with you would have to take it to the dealer if its a new key so they can program the chip in the key
The dealer scan tool is required.
You need the dealers scan tool.
i THINK IT MEANS THE CHIP IN YOUR KEY HAS BEEN DE-ACTIVATED. I'M TRYING TO RESEARCH HOW TO RE-ACTIVATE IT...