To program a One for All remote to be used on a Symphonic television, turn on the television manually. Then, hold down the television button on the remote, and push the power button until the television shuts off.
you find the code to the apparatus you want the remote to work to it usually is written some where in the manual if your brand is not in it test a another brand it can work for your apparatus.
The zenith universal remote codes to program a symphonic television are 0091, 0053, 0155, and 0126. A universal remote can be used to operate a number of brands of one or more electronic devices.
The Symphonic televisions usually all have one code to transmit the signal to the Philips Universal Remotes. The normal code that works for most of them is 4827-1593.
I have one rodneypeyton@msn.com
One stop service
Which remote control? A number of outfits post online different codes for different remotes for different sets. (Hope that made sense.) Try programming the remote to operate another set other than the Symphonic. If the remote works, fasten your seatbelt. Here's why. There are still a few "hard-headed" manufacturers who make sets that have remotes with "oddball codes" and they cannot be replaced with the universal remotes. Some Symphonic sets are like this. Buy a remote from a company that will take it back if it won't program to your set. Ask them up front about returns. Radio Shack is one such company that will take the remote back if you cannot make it work with your unit and you return it with all the stuff it came with - including the receipt.
Any 'One for All' brand remote will work for sure. I have a Symphonic TV, too. Most large department stores and almost all big electronics stores have programmable remote controls for sale. These remotes are designed to replace missing or broken remotes and can be programmed to operate almost any newer television on the market. (The instructions come with the remotes.) Oh, and they don't cost too much, either. Under ten bucks in most cases. Note: There are still a few "hard-headed" manufacturers who make sets that have remotes with "oddball codes" and they cannot be replaced with the universal remotes. Some Symphonic sets are like this. Buy a remote from a company that will take it back if it won't program to your set. Ask them up front about returns. Radio Shack is one such company that will take the remote back if you cannot make it work with your unit and if you return it with all the stuff it came with - including the receipt.
Symphonic DVD player WF-104 code for RCA universal remote model RCR311S is 30675. If this one doesn't work for you, then you just need to download the official Owner Manual for your particular remote. The RCR311S owner manual was in pdf online! Best Wishes-this can be a very frustrating problem!
One can get information on how to program a Genie Intellicode remote control online at various websites. One can find information on how to program a Genie Intellicode remote at Garage Door Openers and the Genie official website.
To program sentry remote controls for gates, one must make sure all of the software is compatible with each other. One must also make sure the programs support each other.
It's hard to say. Try programming it to another set and make sure the remote works. If it does, fasten your seatbelt. There are a few "hard-headed" manufacturers who make sets that have remotes with "oddball codes" and they cannot be replaced with the universal remotes. Some Symphonic sets are like this. Buy a remote from a company that will take it back if it won't program to your set. Ask them up front about returns. Radio Shack is one such company that will take the remote back if you cannot make it work with your unit and you return it with all the stuff it came with - including the receipt. Good luck.
I would like to know how do i program a radio shack 5 in one remote 15-2200.
Symphonic poem