Want this question answered?
You can program your DISH remote to work on your TV and other electronic components but unless you have codes or instructions on how to a universal remote to the receiver, we don't have codes specifically to operate in that manner. I would contact the manufacturer of your remote.
yes
Some universal remotes can be programmed to work on the DISH receiver but you won't be able to use your Samsung TV remote to operate your DISH receiver. You can program your DISH remote to work your Samsung TV. I have provided instructions on how to program your DISH remote to your TV. I have also provide TV codes.TV codes: 738, 680, 516, 679, 666, 573, 665, 667, 669, and 653Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.Possibly, depends on the remote
To program your DISH Network remote to your TV there are a few different DISH Network remote codes that you can try & will need in order to successfully program your remote to the TV. The DISH Network remote codes for your Curtis Mathes TV will be one of the following, 516, 531, 595, or 253. If you are unsure how to perform the steps to program
Normally only our remotes will work with our receivers. Some universal remotes may be used but may not have all the functionality of our remotes. You would need to get the code for our receiver from the manufacturer or instructions on how to manually program the remote to our receiver.
Normally only our remotes will work with our receivers. Some universal remotes may be used but may not have all the functionality of our remotes. You would need to get the code for our receiver from the manufacturer or instructions on how to manually program the remote to our receiver.
To address the remote to the receiver, you do need to be on the System Info screen. You can accomplish this by pressing the Menu button on the old remote 2 times or by pressing the System Info button on the receiver for certain receiver models. Once you are on the System Info screen just follow the instructions below. On a Dish Network Remote Press and hold the sat button down on the new remote until all the buttons light. release the sat button it should be blinking. press the rec button 3 times. your new remote should now work your Dish Network Receiver.
sync to icloud
No
You cannot program a Direct TV receiver with this remote. The Toshiba TV this was designed for was introduced before the Direct TV HD systems came out. This remote does not control any model of DVR. If you want to control both of these with one remote, get a Logitech Harmony remote.
remote receiver
Addressing the remote to the receiver is pretty easy. You can view the steps below to get that taken care of! Addressing Remote to Receiver: 1.) Go to System Info screen. 2.) Hold down the SAT button until all mode lights light up. 3.) Enter a number between 1 and 15 using the numeric keypad on the remote. 4.) Press the pound (#) button. 5.) Once the SAT button blinks three times, press record. 6.) Test remote and see if it works.