If you want to add a key.....
*You must have two original keys to perform this procedure. If you only have one key, you WILL have to take it to the dealer to get it programmed**
1. Insert and...
if you installed a new ECU. you install your old mem cal eprom
the best way is to desolder the factory eprom solder in a zif socketpurchase atmel 29c256 eeprom. you would need software such as tuner...
If you need to program your new keyless entry remotes without a trip to the dealer here is how. It works, I just did two myself.
Read throught the steps before you try.
1. Remove key from ignition....