If your LG DVD remote has a TV control section, normally with a white line around it,simply hold the TV power on/off button and then push up and down on the TV channel selector. Your TV will turn off. The remote is programmed.
Hope this helps
To program your remote to the TV, just follow the steps below! I have also listed some of our most used codes for LG
Addressing Remote to TV:
1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.
The codes we here at DISH Network have & would use to attempt to program the DISH Network remote with your Olevia TV would be, 506 or 127.
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
You can program your DISH remote to work on other electronic equipment. The gyration remote should have instructions on how to program it to other components. If you don't have the instructions, I would give the company a call to try and get the instructions.
You can program your DISH remote to work on your TV and other electronic components but unless you have codes or instructions on how to a universal remote to the receiver, we don't have codes specifically to operate in that manner. I would contact the manufacturer of your remote.
Try these remote codes: 743, 744, 745, 757. If these do not work, call Dish Network they will be happy to assist you.
No, the dish network remote only has those codes. If you want to control everything, get a Logitech Harmony remote.
Call the Dish Network to inquire about your remote and your new TV: 1 866 869-3109 Customer service can advise you and provide a new remote control if needed.
Some universal remotes can be programmed to work on the DISH receiver but you won't be able to use your Samsung TV remote to operate your DISH receiver. You can program your DISH remote to work your Samsung TV. I have provided instructions on how to program your DISH remote to your TV. I have also provide TV codes.TV codes: 738, 680, 516, 679, 666, 573, 665, 667, 669, and 653Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.Possibly, depends on the remote
Auria TVs use the same codes as NEC. If you lookup NEC in your remote control manual it should work. 10037 will work.
Normally only our remotes will work with our receivers. Some universal remotes may be used but may not have all the functionality of our remotes. You would need to get the code for our receiver from the manufacturer or instructions on how to manually program the remote to our receiver.
To address the remote to the receiver, you do need to be on the System Info screen. You can accomplish this by pressing the Menu button on the old remote 2 times or by pressing the System Info button on the receiver for certain receiver models. Once you are on the System Info screen just follow the instructions below. On a Dish Network Remote Press and hold the sat button down on the new remote until all the buttons light. release the sat button it should be blinking. press the rec button 3 times. your new remote should now work your Dish Network Receiver.