Want this question answered?
The codes we here at DISH Network have & would use to attempt to program the DISH Network remote with your Olevia TV would be, 506 or 127.
Try these remote codes: 743, 744, 745, 757. If these do not work, call Dish Network they will be happy to assist you.
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
No, the dish network remote only has those codes. If you want to control everything, get a Logitech Harmony remote.
You can program your DISH remote to work on your TV and other electronic components but unless you have codes or instructions on how to a universal remote to the receiver, we don't have codes specifically to operate in that manner. I would contact the manufacturer of your remote.
Call the Dish Network to inquire about your remote and your new TV: 1 866 869-3109 Customer service can advise you and provide a new remote control if needed.
Auria TVs use the same codes as NEC. If you lookup NEC in your remote control manual it should work. 10037 will work.
You can program your DISH remote to work on other electronic equipment. The gyration remote should have instructions on how to program it to other components. If you don't have the instructions, I would give the company a call to try and get the instructions.
To address the remote to the receiver, you do need to be on the System Info screen. You can accomplish this by pressing the Menu button on the old remote 2 times or by pressing the System Info button on the receiver for certain receiver models. Once you are on the System Info screen just follow the instructions below. On a Dish Network Remote Press and hold the sat button down on the new remote until all the buttons light. release the sat button it should be blinking. press the rec button 3 times. your new remote should now work your Dish Network Receiver.
You can program the DISH Network remote without the remote code, this can be done by completing a Power scan. I have included instructions to further assist you.With the desired equipment on, press and hold the correct Mode button (In this case the mode button will might be "TV") until all the other mode button back lights illuminate, then release.1. Press and release the Power button.2. Press the Up button once a second while pointing the remote at the desired equipment.Note: If the code for the equipment comes up, the equipment will power off.3. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.After completing the power scan to program the DISH Network remote to your T.V the remote should now work, you can try turning the volume up or down or powering the TV on or off.
what station does the t v need to be on for dish remote to work