From 2 wheels to 4 wheels hi, U suppose to stop your SUV completely, then just push the 4hi and u should hear a little clicking sound coming from the two front wheel hubs. On the push switch, the little green or yellow light will start flashing. If it stop flashing, you are good. If not, then just simply take your feet of the brake pedal and let the SUV move just till the light stop flashing. Repeat again if not lock right away.
From 4 hi to 4low you have to stop the SUV and put gear into neutral first, then push the 4low button. There you should have no problem. To disengage to 2 wheels from 4 low, you have do the same thing. Put in neutral and then push 2wl button and will go to normal drive mode again. Hope this will help u out........
no the lug patern is diffrent
pretty sure it already is... Added: FIrst answer is correct. The Highlander is an All-Wheel-Drive (AWD) vehicle when the OBD computer senses the need for a 4-wheel mode, and automatically shifts into it.
if it has manual hubs lock both of them in out side on the front tires they should be red. if not go inside and shift the lever to 4hi or 4Lo to put it in 4 wheel drive
You have to install the master cylinder that is compatible with your truck otherwise if will not work. There is really no difference in a 2wd & 4wd when it comes to the master cylinder.
No.
Shift the 4 wheel drive lever into 4 wheel drive.
i have a 2 wheel drive and someone said i can have his 4 wheel drive but drive train is gone can i use mine and make the 4 wheel drive into a 2 wheel drive
It is in 4 Wheel drive all the time
To put a Chevy Trailblazer into four wheel driver, locate the four wheel drive component below the instrument panel. While the car is in drive, move the knob into the desired four-wheel drive position.
You put tire chains on the front wheels of a front wheel drive vehicle. The chains help the tires driving the car get a better grip on the road. Some people put chains on all wheels. That makes the brakes work on all wheels.
As long as their the right size.
If you have a lever, pull it into the four wheel drive position. If a switch, put in four wheel drive.