I have a 1994 Chevy Corsica. To replace the serpentine belt is a bit of work, but not really that hard. You will need to take off the right front tire. Once the tire is off, you will see a "panel" with screws on it..4 or 5 i think. You will need to remove this. You will need to unhook the cables from your battery, then loosen up your alternator. You will need to take off the top motor mount. There are 2 bolts holding it to the right fender well at right top. and I believe 3 bolts holding it to the motor mount support. You will notice a bracket right under your alternator. 2 bolts you can reach from the top, 1 bolt you will need to go up under from the bottom. There should be a "window" just to the back of where your tire goes where you can reach through to get the last bolt to the bracket. I used a wrench to raise the tension bar up, and then the belt slips right off.
Randy L.
Put the new serpentine belt on to your 1992 Chevy Corsica pulleys. Push the tensioner pulley to the left to tighten the serpentine belt.
Loosen the tensioner pulley on your 1988 Chevrolet Corsica. When the tensioner pulley is loose the serpentine belt will easily come off. Put the new serpentine belt on and tighten the tensioner pulley.
There should be a diagram on the underside of the hood.
Put the serpentine belt on to the pulleys of your 1994 Chevy engine. Tighten a serpentine belt with the tensioner pulley.
Loosen the tensioner pulley on your 2001 Chevy Impala. The serpentine belt will become loose. Take the old belt off and put the new belt on. Tighten the new serpentine belt with the tensioner pulley.
how to change the serpentine belt on 2003 Chevy express 2500
You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.
You have to release the stress in the tensioners to remove the serpentine belt. When you put it back on there is a diagram under the hood of the car that takes you step by step.
Use a socket and ratchet on the 1991 Astro vans serpentine belt tensioner pulley to pull it to the side, letting tension off of the belt. remove the belt and pun the new belt on. Release the tension to hold the new belt on.
Put a wrench on the tensioner. Push it slack. Replace the belt while holding the tensioner in the slack position.
picturediagram of how to install 89 Cherokee serpentine belt
How do you put on a serpentine belt on a 2002 Isuzu axiom