Somewhat difficult, but with some patience can be done. Start by unbolting the radiator reservoir and moving it up and out of the way. I believe its one 10mm bolt and the rest are just plastic clips. You'll need a serp belt removal tool, you can buy one or usually rent from auto parts store. Find the belt tensioner and using the belt tool, release the tension. Before you do this draw a diagram of how the belt goes, pay close attention. Release the tension, take the belt off. Compare the old belt with new belt to make sure the size is right. Install new belt, make sure its on every pulley perfectly. While the belt is off inspect the tensioner for 'play' it should not wobble or move roughly. If vehicle has high miles you may want to replace the tensioner as well. Put the radiator overflow bottle back, and you're all done! You'll probably have some bruised knuckles.
2005 ford taurus serpentine belt diagram
between the back valve cover and the intake manifold
The 2003 Ford Taurus has 12 valves.
The 2003 Ford Taurus has a V6 engine.
what will cause a Ford Taurus 1998 24 valve to overheat
show me the diagram a 2001 ford taurus se fan belt
This is the escort forum not the ford taurus.
The 2003 Ford Taurus has overhead valves (OHV).
The 2003 Ford Taurus has a 4-speed automatic.
The 2003 Ford Taurus is a gas-powered vehicle.
Yes. This car has a Serpentine belt. Part Number-#DY5060955
The height of the 2003 Ford Taurus is 4 ft. 8.1 in. (56.1 in.).