First of all, all the parts have to be there!
Place the bridge the same distance from the last fret as the nut is from the last fret. Start installing the highest pitched string first until it is secure. Proceed with the remainder of the strings. After all of the strings have moderate tension proceed with proper tuning. Constantly making sure the bridge position doesn't change.
The accordion does not have strings. The banjo has a tight skin that vibrates with the strings. The ukulele uses the thin wood for the vibration.
No, though some can be used for both depending on the size and type. Metal strings are seldom used on an ukulele as the instrument is not designed for the stress.
A banjolele is a stringed instrument that combines the ukulele with the banjo. It provides more volume than a standard ukulele and was very popular in vaudeville.
I have I believe it's called a banjolele. It is old probably 1900's. It is made with mother of pearl and has 8 strings. It says musketeer on it. Can you teel me about how old it could be and is it worth alot of money?
Have you even heard of the ukulele banjolele???
The accordion does not have strings. The banjo has a tight skin that vibrates with the strings. The ukulele uses the thin wood for the vibration.
No, though some can be used for both depending on the size and type. Metal strings are seldom used on an ukulele as the instrument is not designed for the stress.
A banjolele is a stringed instrument that combines the ukulele with the banjo. It provides more volume than a standard ukulele and was very popular in vaudeville.
I have I believe it's called a banjolele. It is old probably 1900's. It is made with mother of pearl and has 8 strings. It says musketeer on it. Can you teel me about how old it could be and is it worth alot of money?
First you get four strings of s'getti strings then fold 2 strings and then you take the third string and put it under one of the strings and do the same as the other one and then pull all four strings and that's how start s'getti strings.
you put it on the bow not the strings it is called rosin
I've never heard of anyone washing their guitar strings. You have to go out and buy new strings, and put them in.
You need to put the strings in an array, and then loop through the array to output the strings. Something like this would be a simple example: ---------------- var strings = ["s1","s2","s3"]; for ( var i in strings ) { document.write( strings[i] ); }
Have you even heard of the ukulele banjolele???
Yes, no problem. Martin strings can be used on almost any acoustic guitar.
Of course you can. You can also put Fender strings on a Gibson. Nothing bad will happen. Just make any necessary truss rod adjustments if you are putting different gauge strings on a guitar.
It is down to personal preference as to which strings are best for an archtop guitar. Chromes and flatwound strings are both popular. Light gauge strings are preferable as they put less pressure on the neck.