![]() |
How do you put the oil in on a yamaha pw80 where is the oil input? |
[Edit] |
Answer
If its the 2 stroke oil you want to put in, it needs to be mixed in a petrol can with the petrol, usually to a ratio of 50;1. If its the engine oil it only goes in the clutch housing as it is a wet clutch. If the hole is about half way up the casing, it usually means you keep bike upright and top up until its running back out the hole.
Note: Although the above answer will work, the PW80 is an auto-injector bike. The oil tank is located under the seat which is removed with 2 10mm nuts accessed under the rear fender. There is a viewing window on the left side cover to check the oil level. You should use Auto-Injection 2-stroke oil available from a Yamaha dealer.
we have one in the family. you have t remove the seat as above but you do not have to mix the petrol and oil yourself
First answer by TLRogue. Last edit by Yamaharockz. Contributor trust: 3 [recommend contributor]. Question popularity: 52 [recommend question]




