answersLogoWhite

0


Best Answer

2000 Chevy Tahoe suburban

LS 5.3

Click link.

Answer

You will need to get the firing order for your engine and distributor and trace your steps. In the future be sure to label all of the plug wires with tape prior to removal. The best practice though is to change each spark plug wire one at a time to lower confusion later. - jedgell233

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you put the right spark plug wire on the right spark plug?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you check an engine for spark?

Remove the spark plug wire from the spark plug. Use some heavy gloves or a set of insulated pliers to hold the spark plug wire about 1/4-inch from the engine block (ground) and crank the engine - you should see a spark jump from the wire to the engine ground. For a better check, use another spark plug and put it on the spark plug wire and use it as a "jumper" from the wire to the engine ground.


How do you change spark plugs on 2007 kawasaki 900 classic?

In your tool kit you should have a rench that will fit on the plug. You pull off the spark plug wire and take out the spark plug. Make sure the gap is set right for the new plug and put in in. Do not over tighten.


Wire goes to which spark plug for a saturns1996?

how to put plug wires on a 1996 Saturn sl


How do you find out if my riding mower is not getting a spark?

take the spark wire off, remove spark plug, put wire back on plug, put steel part of plug against the medal part of engine (with a insulated pare of pliers) then crank the motor over watch the electrode on end of plug if you see spark you have it if you don't ....


How do you change the spark plug on a push mower?

The spark plugs on push mowers are usually easy to access - in many cases, you just remove the wire from the top of the spark plug, unscrew the spark plug, put the new one in, and cap it off with the wire again.


How do you put your spark plug in order on a 2001 Chevy Impala?

hoe do you put then spark plug cable in the right order on a impala


How do you change spark plug on craftsman snow blower?

Most snow blowers have the spark plug on top of the motor :to change a spark plug you get a spark plug wrench (take wire cap off the plug) put wrench on spark plug then turn counter clock wise to take it out. To put a new one back in reverse the proses


How do you now if you put leads on distributor in right order?

If you put the spark plug leads back on in the wrong order the engine will most certainly miss fire. The best way is to find the number one spark plug wire and then follow clockwise the firing sequence for the engine.


Where is the right place to put the silicon stuff that comes with the new ignition wires?

The silicon stuff is to help keep the spark plug boots from sticking to the spark plug, so put it in the spark plug boot.


How do you tell if a lawn mower spark plug is bad?

take the spark plug out of the head. then put the spark plug wire back on the spark plug. ground the plug on the engine you can do this by putting the plug any where there is metal and lay it on it. then turn engine over and see if you have spark. if not then do the same thing with just the wire by putting a Philips screw driver in place of the plug, ground it turn over the engine see if there is a spark if their is the plug is bad. if not then the coil or flywheel is bad more than likely it is the coil


What causes your second cylinder to misfire in an '06 Chevy Malibu?

either your coil pack, spark plug, or wire. i would take off the wire on the plug side and check for spark. if none then switch that wire on the coil side with another one on the coil side and see if its the wire ( leave the one you took off to test off) be sure to put them back in the right place. if no spark from either terminal replace wire first, dont forget to check for spark at the plug too. other then that it could be combustion or something which is outta my realm


How do you put dielectric grease on spark plug wires?

Just apply a small dab the size of a tic tac on both ends of the spark plug wire. Also a small dab of anti seize on the spark plug threads will help as well.