How do you re-program a dish network remote to work with a sharp CRT TV?

Answer 1

Here are the codes to try for your Sharp TV: 741, 739, 628, 740, 526, or 608.

Here is the instructions on how to program the remote to your TV.

Address Remote to TV

1. While at the device location, point the remote at the device. Press and hold the device button on the remote. - All four mode buttons should light up
2. Enter the three-digit remote control code - The mode button you selected should light up

If you are programming a code into AUX Mode, you must do the following before entering the device code:

· Press 0 for a TV (if TV code is 500, enter 0500)

· Press 1 for a VCR/DVD (if DVD code is 617, enter 1617)

· Press 2 for any other device (if device code is 639, enter 2639)

1. Press the Pound (#) button - The mode button you are programming should flash three times
2. Press the large, red POWER button - The device should turn off

Please let me know if you have further questions. Thanks.

Answer 2

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.

2.) Release and TV light will be blinking.

3.) Enter code and press #. The TV button should flash 3 times.

4.) Try functions (Volume, Power, etc..) and see if it is working.

5.) If no function, repeat steps 1-4 with another code.

You can get the code for your TV in the sources link below.