Wiki User
∙ 16y agoI have a 1996 and there is a u clip inside wich you need a special gm tool to remove. I have an 03 and if you look underneath the handle there are two hex-head bolts. You can get at em easy enough with a small ratchet. Then there are three or 4 screws along the bottom edge of the door to remove, and you have to take the plastic piece off around the mirror adjuster. Then you can pop it off. Phil
Wiki User
∙ 16y agoHave a look at Crutchfield's website, www.crutchfield.com
mine doesn't. which i hate..=/
A good auto audio shop can fabricate one for you. Or, you might try Crutchfield.com
The lug nut torque specification for a 2002 Sunfire is 90 foot pounds. This is assuming that the rims are factory stocked, as rims with different masses may require different torque settings.
Um, are you trying to install cruise on a car that didn't come from the factory with it? Or are you trying to replace/repair an existent system?FriPilot
One in each door have to remove door panels for access & 2 0n deck lid in trunk get acces to trunk for these speskers.
generally, if you know that the pump is bad or failing, replace it. Repairing it is rarely an option. That's why there's a core charge on them. They are returned for factory refurbishment.
you need a wheel balance when wheels are off for balancing,have then checked to make sure none are out of round or slightly buckled
Pontiac or any local GM dealer should be your first phone call. As I recall they are filled at the factory and the fluid does not need to be replaced.
The factory tires and rims from a 2001 Pontiac grand am cannot work properly on a 2003 Pontiac grand am.
The putting-out system was replaced with the factory-system.
The Pontiac Montana does not come with a factory installed amp in the sound system. The wiring goes directly from the radio to the speakers.