Search unanswered questions...

Enter a question here...

How do you remove a door panel on a 2000 Lexus RX 300?
[Edit]

Hello,

You will have to remove the door trim to gain access to the bolts and connector.

DISASSEMBLY


  1. REMOVE DOOR INSIDE HANDLE BEZEL

  1. Open the cap, then remove the screw.
  2. Using a screwdriver, remove the inside handle bezel. HINT: Tape the screwdriver tip before use.



2. REMOVE POWER WINDOW SWITCH Using a screwdriver, remove the panel as shown in the illustration. HINT: Tape the screwdriver tip before use.




3. REMOVE DOOR TRIM

  1. Using a screwdriver, remove the courtesy light, then disconnect the connector. HINT: Tape the screwdriver tip before use.
  2. Remove the 4 screws and 2 clips.
  3. Insert a screwdriver between the trim and door panel to pry the door trim. HINT: Tape the screwdriver tip before use.
  4. Release the claws, then remove the inner weatherstrip from the door trim.



4. REMOVE INSIDE HANDLE Remove the screw and inside handle, then disconnect the 2 cables.

Hope this helps.

Hello,

You will have to remove the door trim to gain access to the bolts and connector.

DISASSEMBLY


  1. REMOVE DOOR INSIDE HANDLE BEZEL

  1. Open the cap, then remove the screw.
  2. Using a screwdriver, remove the inside handle bezel. HINT: Tape the screwdriver tip before use.



2. REMOVE POWER WINDOW SWITCH Using a screwdriver, remove the panel as shown in the illustration. HINT: Tape the screwdriver tip before use.




3. REMOVE DOOR TRIM

  1. Using a screwdriver, remove the courtesy light, then disconnect the connector. HINT: Tape the screwdriver tip before use.
  2. Remove the 4 screws and 2 clips.
  3. Insert a screwdriver between the trim and door panel to pry the door trim. HINT: Tape the screwdriver tip before use.
  4. Release the claws, then remove the inner weatherstrip from the door trim.



4. REMOVE INSIDE HANDLE Remove the screw and inside handle, then disconnect the 2 cables.

Hope this helps.

Hello,

You will have to remove the door trim to gain access to the bolts and connector.

DISASSEMBLY


  1. REMOVE DOOR INSIDE HANDLE BEZEL

  1. Open the cap, then remove the screw.
  2. Using a screwdriver, remove the inside handle bezel. HINT: Tape the screwdriver tip before use.



2. REMOVE POWER WINDOW SWITCH Using a screwdriver, remove the panel as shown in the illustration. HINT: Tape the screwdriver tip before use.




3. REMOVE DOOR TRIM

  1. Using a screwdriver, remove the courtesy light, then disconnect the connector. HINT: Tape the screwdriver tip before use.
  2. Remove the 4 screws and 2 clips.
  3. Insert a screwdriver between the trim and door panel to pry the door trim. HINT: Tape the screwdriver tip before use.
  4. Release the claws, then remove the inner weatherstrip from the door trim.



4. REMOVE INSIDE HANDLE Remove the screw and inside handle, then disconnect the 2 cables.

Hope this helps.

Improve Answer Discuss the question "How do you remove a door panel on a 2000 Lexus RX 300?" Watch Question

First answer by ID1135566254. Last edit by ID1130081289. Question popularity: 63 [recommend question]

Research your answer:

Answers.com > Wiki Answers > Categories > Cars and Vehicles > Asian Cars > Lexus > Lexus RX > How do you remove a door panel on a 2000 Lexus RX 300?

Our contributors said this page should be displayed for the questions below. (Where do these come from)
If any of these are not a genuine rephrasing of the question, please help out and edit these alternates.
How do you remove door panel 01 lexus?  How do you remove door panel on rx 300?  How do you take off a door panel on a lexus rx 300?  How do you remove the door panels on a lexus rx 300?  How do you remove door panel on a 2000 Lexus RX 300?