Behind the dash, on the headlight switch itself, there is a "pin" that you have to push in in order to pull out the light knob. Feel under the dash, the pin is toward the back of the switch. When you push it in, with your other hand, move the light knob in and out. It will come out. Then, you can remove the nut, take the switch out from behind the dash.
How do you install a stop light switch on a 1972 cougar
BAD IGN SWITCH
Unhook the battery pull switch out to headlight on position reach under dash to switch , will be a small button on it , push the button at same time pull on switch knob the know and stem will come out use a wide bladed driver and remove the nut that holds the switch in from front of dash unplug wiring remove
to remove the ignition switch from a 72 Chevy first remove the steering wheel, then remove the three screws that hold the turn signal assembly the turn signalhandle will unscrew if there is no cruse control if there is the handle will have a screw holding it in place this must be removed under the turn signal assembly there is a screw usually a #27 torx remove this and your ignition switch will slide right out
Drain the water from your 1972 Chevy Nova cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts.
Drain the water from your 1972 Chevy Corvette radiator. Remove the radiator hoses. Remove the stabilizing arm retaining bolt. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
No.
chiltons repair manual from the library.
# Drain the radiator below the thermostat level # Remove the water outlet elbow assembly from the engine and the remove the thermostat
There is no fuse for the headlights in that truck. The circuit is protected by a circuit breaker located inside the headlight switch.
Front of tranny, kinda sorta on the right side.
Where r reverse lights on 1972 kombi van