on the handle with the push button. there will be a hole, use a paperchip or something similar to push the button inside and then just pull off the handle. Then the ring that the handle was in will now just twist off (unscrew) counter clockwise. then the whole assembly should just come right out.
by sliding the handle rearward
The interior door handle on a Hyundai latches onto the locking mechanism of the door. First remove the old handle by unscrewing it from the door panel. Pull the handle out and remove the locking wire. Install the new unit with the locking mechanism in place. Tighten the mounting screw.
Its quite an involved job, but to get the locking mechanism out firstly remove the door panel, then remove the exterior handle which will allow you to remove the locking motor. The links take you to the forum with pictures and more detailed steps.
The door handle of a 1996 Pontiac Grand Prix can be replace because broken units will can not be fixed. To replace a handle remove the unit from the door and unhinged the locking mechanism.
Gather Tools and Materials. ... Turn Off the Water Supply and Open the Faucet. ... Remove the Handle Cap, Handle and Faceplate. ... Remove the Locking Clip. ... Remove and Replace the Cartridge. ... Replace Other Parts and Test. ... Remove the Metal Stem in a Shower Faucet with Two Handles. ... Replace the Metal Stem if Needed.
Remove the firing pin from the rear and the locking bolt will side out the side of the bolt
there should be a locking pin just on the backside of the handle. If you push in on the door just around the handle you shold be able to see it. needle nose plyers are to big to fit so you have to use something smaller, a bent coathanger works just right.
The rod on the door handle has an adjustment. Remove the door handle and adjust the rod so it pushes the locking device further.
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
Remove the inside door panel. Remove the door handle linkage. Remove the door handle retaining bolts. The front door handle will come off.
If I understand the question correctly - - the door is on child safety lock and you can't open the door to fix the handle. If so - - you will have to remove the interior door panel to gain access to the locking mechanism and unlock it manually. Mechanical methods of opening the door (Slim Jim's, etc) stand a good chance of damaging the locking mechanism by forcing it, and you (or someone) will have to remove the door panel to repair it anyway.
The tire locking nut on a 2003 Pontiac Montana is removed by using a special tool located in the truck of the vehicle. It meshes with the locking nut which allows it to be easily removed.