Look under the left side and unplug the taillight connector. On the upper end of each support cable push tab and release cable. Remove bottom right side of tailgate by pulling it toward you. It is slotted and will pull out when the tailgate is at the correct angle. Once that is released slide the tailgate to the right to release the left side. One strong person can do this but two is makes it eaiser. Be careful it is heavy.
Not legally.
Open the tailgate, remove the retaining cables from the studs, pull out on the passenger side of the tailgate.
Use 10w30 in a 1995 Dodge Dakota.
were id the data link connector for a 1995 dodge dakota
No.No.
Where can I get a free copy of a 1995 Dodge Dakota Sport Owners Manual
big hammer
Yes, but you will have to use your 1995 intake.
Pop back the plastic cover from the center of the crank and remove Allen or Philips screw. Handle will then pull off.
No, Dodge does not use inertia/reset switches.
There is no difference in a 1995 dodge dakota with a 3.9 v6 engine and a 2000 dodge dakota with a 3.9 v6 engine and you can exchange the newer engine with the older one.
Yes. A 3.9 v6 engine from a 1995 Dodge Dakota will fit into a 2000 Dodge Dakota with a 3.9 v6 engine. You will have to swap the intake and exhaust manifolds along with all sensors and fuel rail though.