How do i remove an air compresser in a GMC Cheyene
There is a pressure switch that runs the clutch. If there is not enough freon in the system the switch will never allow the clutch to turn on.
above the a/c and heater housing, behind the glove box , right side dash
The clutch fan on a 2004 Chevy Silverado is removed by loosening the alternator bracket and pulling the drive belt. The fan's retaining bolts can then be removed and pulled from the engine.
Best if you own a compressor, air tools keeps the clutch from turning. If no compressor, mount it in a vise to keep it from turning and remove each bolt, can be tricky as they are mounted together but turn seperately when activated.
injectors 6.6 Chevy silverado
You have to remove the transmission to get to the clutch slave cylinder on that truck. You can pull the engine if you want and get to it. YOUR CHOICE.
bad clutch bearing
you have to remove the cooling fan to change the fan clutch. you need to loosen the fan shroud, be careful to remember the serpenting belp routing, maybe draw a diagram to remind you. 4 bolts holding the fan to the water pump, 4 bolts holding the clutch to the fan. this is how i did mine on a 5.0l Chevy truck
Remove the air conditioning hoses from your 1997 Chevy Malibu air conditioning compressor. Remove the compressor belt. Remove the compressor retaining bolts. Reverse the process to install your new air conditioning compressor.
You CAN"T. If you are having clutch problems then it is time for aNEW clutch kit and clutch slave cylinder too. NO ADJUSTMENT
Remove the cover from your 2001 Chevy Silverado stereo. Remove the stereo retaining bolts. Remove the wiring harness and the antenna cable from the back of the stereo.
You need a special tool to remove and replace the clutch. Your local auto parts store can sell or maybe rent you the tool.