Step 1- Remove headlight retaining ring. This is held on by the two 8mm Hex head bolts. Take out the 8mm hex bolts and the headlight flips up and out. The Phillips screws are for adjustment only. Don't mess with these!
Step 2-Unhook the headlight connector. Just pull it off the headlight.
Step 3- Take off the dust cover.
Step 4- Undo the headlight bulb retainer. There is a trick to this I can't really explain but it has to do with unhooking the small tension wires.
Step 5- The bulb should come out. Put everything back together in reverse order.