Want this question answered?
It is easiest removed from the top.
from in the trunk behind the carpet
The 1993 Chevrolet Corvette inside door panels are held in place with eight retaining clips and two retaining bolts. The retaining bolts will be near the door handle. Remove the retaining bolts and pry outward on the retaining clips.
YOU MUST REMOVE, UNFORTUNATELY, THE INNER DOOR PANEL TO GET TO THE CLIPS OF THE COVER....BB
Push back on the bottom of the bench seat (takes a lot of pressure) to release holding clips Lift bench out Back of seat is secured by clips or bolts that are now accessible - remove these and lift upward on back of seat to release upper clips Remove seat back
To remove the door panel on a 1993 Mercury Cougar XR7, the first thing to do is to remove the lens covers from any lights in the door. The unscrew the light fixtures from the door. The door panel is attached by the use of clips. With a little nudging with a flat object, such as a screw driver, the clips will pop free of the metal.
Sport Clips was created in 1993.
Try puting rearward pressure on the bottom of the seat bench (take a lot of force) tio release locking clips Lift up and remove bench There should be bolts or clips securing the back of the seat exposed Remove or release these and lift straight up on the rear of seat to release upper clips to remove rear of seat
I don't believe that year of Taurus used Torx bits on the caliper.They were Allen screws or hex bolts
The 1989 Taurus has larger headlights separate from the turn signal(corner lamp) The 1993 Taurus has more slender headlights joined to the corner lamp.
There is no specific information pertaining to a 1993 Ford Taurus's towing capacity. However, the Ford Taurus in general can tow about 2,000 pounds.
None will work.